Accueil
Marques

No brand

Fournisseurs
Meilleures Ventes
Flanged ballrace 6 x 10 x 3 mm Aperçu rapide

Référence: 92/91

Flanged ballrace 6 x 10 x 3 mm

Commentaire(s): 0

Ballraces are used wherever moving parts are required to run with a minimum of play and a minimum of friction. The more ballraces are used, the more smoothly the mechanics of a helicopter works, and the lower the rate of wear. The dimensions of a ballrace mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness. For flanged bearings the same...

Prix 14,70 €
Détails
En vente sur demande
Toutes les meilleures ventes

Hub-bell for driven tail rotor

36/45
Note 

Provided that you maintain your model helicopter conscientiously and set it up according to the instructions, the model's flying load limits are well outside its normal flight envelope.
Detail features of the kit are designed to suit normal applications, but different parts can be retro-fitted at any time, e.g. if you wish to convert a Kobold into a mechanical system for a full-fuselage model. To extend the load limits further you can use this freewheel and/or this hub (if you want a driven tail rotor for auto-rotation). However, both must only be used in conjunction with the pinion shaft 41/25. The outside diameter is 59 mm in both cases.
Hub, reinforced, for driven tail rotor, with internal-tooth gear

87,20 €
TTC
Quantité
En vente sur demande

 

Política de seguridad

 

Política de envío

 

Política de devolución

Description

Provided that you maintain your model helicopter conscientiously and set it up according to the instructions, the model's flying load limits are well outside its normal flight envelope.
Detail features of the kit are designed to suit normal applications, but different parts can be retro-fitted at any time, e.g. if you wish to convert a Kobold into a mechanical system for a full-fuselage model. To extend the load limits further you can use this freewheel and/or this hub (if you want a driven tail rotor for auto-rotation). However, both must only be used in conjunction with the pinion shaft 41/25. The outside diameter is 59 mm in both cases.
Hub, reinforced, for driven tail rotor, with internal-tooth gear

Détails du produit
36/45
Avis

Aucun avis n'a été publié pour le moment.

Donnez votre avis

Hub-bell for driven tail rotor

Hub-bell for driven tail rotor

Provided that you maintain your model helicopter conscientiously and set it up according to the instructions, the model's flying load limits are well outside its normal flight envelope.
Detail features of the kit are designed to suit normal applications, but different parts can be retro-fitted at any time, e.g. if you wish to convert a Kobold into a mechanical system for a full-fuselage model. To extend the load limits further you can use this freewheel and/or this hub (if you want a driven tail rotor for auto-rotation). However, both must only be used in conjunction with the pinion shaft 41/25. The outside diameter is 59 mm in both cases.
Hub, reinforced, for driven tail rotor, with internal-tooth gear

Donnez votre avis
16 otros productos en la misma categoría:
Rodamiento de 6 x 10 x 2.5 mm Vista rápida

Referencia: 99 A

Rodamiento de 6 x 10 x 2.5 mm

Reseña(s): 0

the inner ring of a ballrace (in roll-axis levers, mixer cranks etc.) must be free to rotate. are used to provide clearance where necessary. Shim washers are also used to compensate for excessive clearance which may result when tolerances accumulate.

Precio 13,50 €
Más
En venta bajo pedido

Suivez-nous sur Facebook

Facebook