Riferimento: 2682

XLC V2 lifting helicopter

The XLC helicopter is designed as a load-carrier, and is capable of transporting a payload of up to 15 kg in addition to its airframe weight of around 17 kg. The fuel tank capacity of around 9.5 litres is also generous, permitting extended flight times. However, please note that a full tank halves the maximum possible payload. The low vibration levels of...

Riferimento: 800/41

Canopy ball-end bolts M 3

 Content of the package 2 piecesComponent part for the quick-release canopy set Ord.No. 800/40

Riferimento: 855/9

GRP Sky Fox SX

This GRP canopy is specially designed for helicopter trainers from the Sky Fox series, e.g. for the Sky Fox, Kobold and Evolution. It has been a standard feature of the Sky Fox SX kit for quite some time.You will need to use 24 mm long canopy holders for lateral fixing.This GRP canopy is supplied with a factory-fitted carbon fibre screen.GRP canopy,...

Riferimento: 8311

Benzin Trainer

Riferimento: 10/44

Kufenendkappe 10 mm

Riferimento: 8370

Joule

Riferimento: 800/25

Stabilizzatore grande

If you fit a large stabiliser to your trainer there is no need for a tail skid. This stabiliser provides the tail rotor blades with enough ground clearance, and offers good flight stability at low airspeeds. There are two versions with different methods of attachment.275 mm high118 g total weightscrew fitting to tail rotor holder

Riferimento: 304

Braccio di coda di 20 x 0,8 x 780 mm

 Tail boom20 x 0.8 x 780 mmsilver

Riferimento: 800/4

Stabilizzatore bianco

Instead of a horizontal fin (for mounting on the tail boom) the small inset horizontal panel replaces that. The inset fits on top of the stabiliser, outwards opposite of the tail rotor.220 mm high, excl. tail skid3-part, 45 g total weight

Riferimento: 800/42

Canopy ball-end bolts M 4

 Content of the package 2 piecesComponent part for the quick-release canopy set Ord.No. 800/40

Riferimento: 870/10

X-Treme

If prefered the canopies of the X-Treme series can be interchanged.They are pre-finished.Without decalPlease take care to always choose the correct length canopy holder.

Riferimento: 8011

Silence evo

The Silence evo is an electric helicopter based originally on the Sky Fox series; with a rotor diameter of 1500 mm it is the ideal size, even for beginners. The model offers docile handling in the air, while loops and rolls are within its aerobatic repertoire.It is available in two variants: with flybar or flybarless Features: New mechanics casing to...