Teste rotore, Pale, e Accessori

Riferimento: 703/39

Scala della testa del rotore

Lama Scale Rotorhead: for the large Vario LamaWe have now finalized our tests with the Starwood Lama scale rotorhead on the Vario Lama 1:4. Now we are proud to present to you under the Ord.No. 703/39, a truly Scale rotor head including all necessary parts in order to mount this head on the Vario Lama.The head is available now. The kit includes the...

Riferimento: 71 A

Corpo centrale, compensatore di passo

Centre piece for pitchcompensator, GFK, alone.

Riferimento: 703/94

Scalare la testa del rotore per Alouette II, parzialmente assemblata

This rotor head will please all the scale fanatics amongst you. It is aimed for use with all mechanical versions of the Vario Alouette II, no matter if it is the Benzin version or for electric, methanol or for PHT2. This aluminium beauty is satisfying all the aesthetic requirements and will definitively make your Alouette II look nicer. Vario’s main point...

Riferimento: 72/1

Freno rotore ø oltre 2 m.

When you have landed and stopped the engine, the rotor head continues spinning for quite some time until it stops by itself. A rotor brake shortens the time you have to wait. Using light pressure with the flat of your hand on the domed face of the rotor brake you can stop the rotor in a few moments. Pease note: stay in safe distance away from the turning...

Riferimento: 703/480

Testa del rotore Chinook

 For use on Ord. No. 4800 only !! Other rotorheads cannot be used on this model.Two rotor heads are required for Ord.No. 4800.

Riferimento: 68/26

Attacco cerniere, dritto

Swashplate link piece, straight. Content of the package: 2 pieces

Riferimento: 703/30

Testa del rotore a 3 pale 10 mm

Riferimento: 82/31

Bilanciere, VTR

Rocker, GRP, for rotor head 702/70, alone

Riferimento: 71/14

Bracci passo compensatore

Pack of 2

Riferimento: 702/59

Toothed belt pulley 17-tooth XL Ø8mm

Not available

Riferimento: 74/19

OR 1,5 x 19 mm. tipo morbido

O-ring 1.5 x 19 mm soft Content of the package: 8 pieces Tip: O-rings always slide with a drop of silicone oil onto the shaft.

Riferimento: 80/10

Ponte compensatore di passo

The control bridge actuates the flybar. The servos pass the control commands to the swashplate. The collective pitch compensator connected to the swashplate transfers the movement to the control bridge via the angled pushrods. The flybar accepts the control commands and passes them on to the blade holders and the rotor disc.Control bridge, GRP, for 4 mm ∅...