Home
Marchi

Nessuna marca

Fornitori
Migliori vendite
Flanged ballrace 6 x 10 x 3 mm Anteprima

Riferimento: 92/91

Flanged ballrace 6 x 10 x 3 mm

Recensioni: 0

Ballraces are used wherever moving parts are required to run with a minimum of play and a minimum of friction. The more ballraces are used, the more smoothly the mechanics of a helicopter works, and the lower the rate of wear. The dimensions of a ballrace mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness. For flanged bearings the same...

Prezzo 14,70 €
Più
In vendita su richiesta
Aste 3,0 x 75 mm Anteprima

Riferimento: 70/76

Aste 3,0 x 75 mm

Recensioni: 0

Ready-made pushrod, threaded M 3. Content of the package: 1 piece

Prezzo 6,30 €
Più
In vendita su richiesta
Tutte le migliori vendite

Ponte compensatore di passo

80/10
Valutazione 


The control bridge actuates the flybar. The servos pass the control commands to the swashplate. The collective pitch compensator connected to the swashplate transfers the movement to the control bridge via the angled pushrods. The flybar accepts the control commands and passes them on to the blade holders and the rotor disc.

Control bridge, GRP, for 4 mm ∅ flybar
17,00 €
Tasse incluse
Quantità
In vendita su richiesta

 

Política de seguridad

 

Política de envío

 

Política de devolución

Descrizione


The control bridge actuates the flybar. The servos pass the control commands to the swashplate. The collective pitch compensator connected to the swashplate transfers the movement to the control bridge via the angled pushrods. The flybar accepts the control commands and passes them on to the blade holders and the rotor disc.

Control bridge, GRP, for 4 mm ∅ flybar
Dettagli del prodotto
80/10
Recensioni

Ancora nessuna recensione da parte degli utenti.

Scrivi la tua recensione

Ponte compensatore di passo

Ponte compensatore di passo



The control bridge actuates the flybar. The servos pass the control commands to the swashplate. The collective pitch compensator connected to the swashplate transfers the movement to the control bridge via the angled pushrods. The flybar accepts the control commands and passes them on to the blade holders and the rotor disc.

Control bridge, GRP, for 4 mm ∅ flybar
Scrivi la tua recensione
16 altri prodotti della stessa categoria:
Rotor cap for Multi blade head Anteprima

Riferimento: 707

Rotor cap for Multi blade head

Recensioni: 0

The diameter is 83 mm and the construction height from the screw-on surface to the highest point is 13 mm.It is fastened using an M4 x 14 hexagon socket screw (included).

Prezzo 30,60 €
Più
In vendita su richiesta
Bearing pin Anteprima

Riferimento: 68/19

Bearing pin

Recensioni: 0

Bearing pin for swashplate driver 68/20. Content of the package: 1 piece.

Prezzo 11,20 €
Più
In vendita su richiesta
O-ring 2 x 4 mm soft Anteprima

Riferimento: 74/4

O-ring 2 x 4 mm soft

Recensioni: 0

O-ring 2 x 4 mm soft Content of the package: 8 pieces Tip: O-rings always slide with a drop of silicone oil onto the shaft.

Prezzo 6,30 €
Più
In vendita su richiesta
GRP blade holder, 5 mm ∅ hole Anteprima

Riferimento: 76/16

GRP blade holder, 5 mm ∅ hole

Recensioni: 0

As demands on helicopters continue to rise, so stronger blade holders are required. In this case a 14 mm blade holder is combined with a 5 mm Ø hole for blade retention, i.e. the matching blade holder screws and self-locking nuts are M5 in size.GRP blade holder with long linkage armfor two-blade rotor heads

Prezzo 30,60 €
Più
In vendita su richiesta
Inertia weights for Ø 5 mm... Anteprima

Riferimento: 79/8

Inertia weights for Ø 5 mm flybar

Recensioni: 0

Inertia weights are small "extra brakes". They increase the gyroscopic stability of the flybar and slow down the rotor head's response. For every beginner we recommend these so the responsiveness of the rotor head is reduced. The rotor head becomes more responsive as the inertia weights are moveded inwards (always place equally!). Inertia weights suitable...

Prezzo 30,60 €
Più
In vendita su richiesta
OR 9,00 x 4,5 mm Anteprima

Riferimento: 832/74

OR 9,00 x 4,5 mm

Recensioni: 0

O-ring 9 x 4.5 mm Content of the package: 4 pieces Tip: O-rings always slide with a drop of silicone oil onto the shaft.

Prezzo 13,50 €
Più
In vendita su richiesta
Aluminium side frames Anteprima

Riferimento: 68/22

Aluminium side frames

Recensioni: 0

Aluminium side frames for swashplate driver 68/20 and 68/50. Content of the package: 2 pieces

Prezzo 30,60 €
Più
In vendita su richiesta
4-blade centre piece, 10 mm Anteprima

Riferimento: 704/31

4-blade centre piece, 10 mm

Recensioni: 0

Item to a multi-blade rotor head for Ø 10 mm shaft; see Ord.No. 703/30, 704/30 and 705/30.

Prezzo 299,50 €
Più
In vendita su richiesta

Seguici su Facebook

Facebook