Home
Marchi

Nessuna marca

Fornitori
Migliori vendite
Flanged ballrace 6 x 10 x 3 mm Anteprima

Riferimento: 92/91

Flanged ballrace 6 x 10 x 3 mm

Recensioni: 0

Ballraces are used wherever moving parts are required to run with a minimum of play and a minimum of friction. The more ballraces are used, the more smoothly the mechanics of a helicopter works, and the lower the rate of wear. The dimensions of a ballrace mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness. For flanged bearings the same...

Prezzo 14,70 €
Più
In vendita su richiesta
Aste 3,0 x 75 mm Anteprima

Riferimento: 70/76

Aste 3,0 x 75 mm

Recensioni: 0

Ready-made pushrod, threaded M 3. Content of the package: 1 piece

Prezzo 6,30 €
Più
In vendita su richiesta
Tutte le migliori vendite

Rotor head cover for 5-blade head

707/5
Valutazione 

The multi-blade rotor heads of full-size helicopters are generally fitted with protective covers; this applies to the Ecureuil, the Dauphin, the Eurocopter EC 135 and 145, the MD Hughes, etc.

Rotor head covers also look good on your model, and we stock them with indentations corresponding to the number of blade grips.

The covers are made of CFRP and can be painted to suit the model's colour scheme.

Scale rotor head cap for 5-blade rotor head, incl. screw.

  • Laminated of carbon
  • approx. 120 mm ∅, 25 mm high
75,30 €
Tasse incluse
Quantità
In vendita su richiesta

 

Política de seguridad

 

Política de envío

 

Política de devolución

Descrizione

The multi-blade rotor heads of full-size helicopters are generally fitted with protective covers; this applies to the Ecureuil, the Dauphin, the Eurocopter EC 135 and 145, the MD Hughes, etc.

Rotor head covers also look good on your model, and we stock them with indentations corresponding to the number of blade grips.

The covers are made of CFRP and can be painted to suit the model's colour scheme.

Scale rotor head cap for 5-blade rotor head, incl. screw.

  • Laminated of carbon
  • approx. 120 mm ∅, 25 mm high
Dettagli del prodotto
707/5
Recensioni

Ancora nessuna recensione da parte degli utenti.

Scrivi la tua recensione

Rotor head cover for 5-blade head

Rotor head cover for 5-blade head

The multi-blade rotor heads of full-size helicopters are generally fitted with protective covers; this applies to the Ecureuil, the Dauphin, the Eurocopter EC 135 and 145, the MD Hughes, etc.

Rotor head covers also look good on your model, and we stock them with indentations corresponding to the number of blade grips.

The covers are made of CFRP and can be painted to suit the model's colour scheme.

Scale rotor head cap for 5-blade rotor head, incl. screw.

  • Laminated of carbon
  • approx. 120 mm ∅, 25 mm high
Scrivi la tua recensione
16 altri prodotti della stessa categoria:
Anello 3 x 7 mm. tipo morbido Anteprima

Riferimento: 74/5

Anello 3 x 7 mm. tipo morbido

Recensioni: 0

O-ring 3 x 7 mm soft Content of the package: 4 pieces Tip: O-rings always slide with a drop of silicone oil onto the shaft.

Prezzo 11,20 €
Più
In vendita su richiesta
OR 9,00 x 4,5 mm Anteprima

Riferimento: 832/74

OR 9,00 x 4,5 mm

Recensioni: 0

O-ring 9 x 4.5 mm Content of the package: 4 pieces Tip: O-rings always slide with a drop of silicone oil onto the shaft.

Prezzo 13,50 €
Più
In vendita su richiesta
GRP blade holder, 22 mm... Anteprima

Riferimento: 702/76

GRP blade holder, 22 mm blade throat

Recensioni: 0

This blade holder was specially developed for the large Bell 47 G III with a rotor diameter of 2.36 m. It has a 22 mm blade throat and a 6 mm Ø bore for the retaining screw, i.e. the matching blade holder screws and self-locking nuts are M6 in size.

Prezzo 37,80 €
Più
In vendita su richiesta
Rotor cap for Multi blade head Anteprima

Riferimento: 707

Rotor cap for Multi blade head

Recensioni: 0

The diameter is 83 mm and the construction height from the screw-on surface to the highest point is 13 mm.It is fastened using an M4 x 14 hexagon socket screw (included).

Prezzo 30,60 €
Più
In vendita su richiesta

Seguici su Facebook

Facebook