Linkage ball

Référence: 79/8

Inertia weights for Ø 5 mm flybar

Inertia weights are small "extra brakes". They increase the gyroscopic stability of the flybar and slow down the rotor head's response. For every beginner we recommend these so the responsiveness of the rotor head is reduced. The rotor head becomes more responsive as the inertia weights are moveded inwards (always place equally!). Inertia weights suitable...

Référence: 68/26

Raccord droit

Swashplate link piece, straight. Content of the package: 2 pieces

Référence: 82/19

Balancier Delta 200 mm, int. 5 mm

Aluminium rocker for Delta head, 5 mm ∅, alone.

Référence: 71/56

Pièce centrale en alu Ø 12 mm

Pitch mixer centre piece, aluminium, 12 mm Ø

Référence: 832/76

Blade holder, 22 mm

Blade holder, 22 mm, alone

Référence: 832/73

Blade pivot shaft 10 x 187 mm

Blade pivot shaft 10 x 187 mm for rotor head 722/72

Référence: 257/45

Rocker kit for Bell UH / Bell 212 T-Rex

Not available

Référence: 76/15

Porte-pales GFK

Blade holder, GRP, reinforced

Référence: 705/31

5-blade centre piece, 10 mm

Item to a multi-blade rotor head for Ø 10 mm shaft; see Ord.No. 703/30, 704/30 and 705/30.

Référence: 1005/8

Kit de conversión varillaje directo para JetRanger XL eléctrico

Référence: 72/22

Rotor head centre piece, rigid

Aluminium centre piece, rigid, for 12 mm main shaft

Référence: 72/42

CFRP plates for aluminium hub

This rotor head hub with its bonded-in carbon fibre plates is a real head-turner. The plates are simply glued into the existing recesses on both sides. We recommend silicone rubber, Ord.No. 10/11, as adhesive.CFRP plates for aluminium hub matching Ord.No. 832/72pack quantity: 2 plates

Référence: 87/4

Chape double 90°

A 90° twisted double ball-link connect the mixer lever to the ball collet on the flybar. Content of the package: 2 pieces

Référence: 74/20

O-ring 3 x 11 mm, for CSS rotor head

O-ring 3 x 11 mm for CSS rotor head Content of the package: 2 pieces Tip: O-rings always slide with a drop of silicone oil onto the shaft.

Référence: 82/51

Bellcrank

Not available

Référence: 87/20

Actuating lever

The connection between mixer lever and variable rocker is carried out by an actuating lever, triple ballraced. Content of the package: 2 pieces