Home
Marchi

Nessuna marca

Fornitori
Migliori vendite
Flanged ballrace 6 x 10 x 3 mm Anteprima

Riferimento: 92/91

Flanged ballrace 6 x 10 x 3 mm

Recensioni: 0

Ballraces are used wherever moving parts are required to run with a minimum of play and a minimum of friction. The more ballraces are used, the more smoothly the mechanics of a helicopter works, and the lower the rate of wear. The dimensions of a ballrace mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness. For flanged bearings the same...

Prezzo 14,70 €
Più
In vendita su richiesta
Aste 3,0 x 75 mm Anteprima

Riferimento: 70/76

Aste 3,0 x 75 mm

Recensioni: 0

Ready-made pushrod, threaded M 3. Content of the package: 1 piece

Prezzo 6,30 €
Più
In vendita su richiesta
Tutte le migliori vendite

Rotor blade support

33/22
Valutazione 

If you do not wish to remove the rotor blades temporarily for transport, they can be protected effectively in this strong support, which is mounted above the tail boom.
The height of the support, the width of the blade openings and the diameter of the tail boom are the crucial factors when buying a blade support.
This support is ideal for pod-and-boom (trainer) models with a 25 mm Ø tail boom.

  • Rotor blade support
  • for blades of max. 80 mm chord
  • for 25 mm Ø tail boom
17,00 €
Tasse incluse
Quantità
In vendita su richiesta

 

Política de seguridad

 

Política de envío

 

Política de devolución

Descrizione

If you do not wish to remove the rotor blades temporarily for transport, they can be protected effectively in this strong support, which is mounted above the tail boom.
The height of the support, the width of the blade openings and the diameter of the tail boom are the crucial factors when buying a blade support.
This support is ideal for pod-and-boom (trainer) models with a 25 mm Ø tail boom.

  • Rotor blade support
  • for blades of max. 80 mm chord
  • for 25 mm Ø tail boom
Dettagli del prodotto
33/22
Recensioni

Ancora nessuna recensione da parte degli utenti.

Scrivi la tua recensione

Rotor blade support

Rotor blade support

If you do not wish to remove the rotor blades temporarily for transport, they can be protected effectively in this strong support, which is mounted above the tail boom.
The height of the support, the width of the blade openings and the diameter of the tail boom are the crucial factors when buying a blade support.
This support is ideal for pod-and-boom (trainer) models with a 25 mm Ø tail boom.

  • Rotor blade support
  • for blades of max. 80 mm chord
  • for 25 mm Ø tail boom
Scrivi la tua recensione
16 autres produits dans la même catégorie :
Servo mount 120° Aperçu rapide

Référence: 3944

Servo mount 120°

Commentaire(s): 0

When using a 4-point-linkage, the linkages from the servos run in a straight line to the swashplate.A 3-point-linkage does not permit this, here the linkages run diagonally.The 120° servo mounting enables inclined installation of the servos, and the results are straight running linkages to the swashplate.All Sky Fox based mechanics as well as on the...

Prix 19,40 €
Détails
En vente sur demande
Porte pales pour transport Aperçu rapide

Référence: 33/25

Porte pales pour transport

Commentaire(s): 0

La bonne solution pour le transport: La découpe du grand support convient aux différentes formes des poutres sur les fuselages.Support de transportpour fuselages, 30 x 270 x 200 mm

Prix 30,60 €
Détails
En vente sur demande
Servo numbers Aperçu rapide

Référence: 3948

Servo numbers

Commentaire(s): 0

Cable spaghetti? We all know the problem of allocating the servo leads to the receiver outputs. Here's the answer: number them like the pro's do! Simply put the receiver channel number on each lead; they can be removed just as easily. The pack contains three sets of 10, numbered from 0-9, in different colours.Servo numbers, pack of 30

Prix 11,20 €
Détails
En vente sur demande
Quick-release servo mount Aperçu rapide

Référence: 3947

Quick-release servo mount

Commentaire(s): 0

During construction we often need that "third hand", and there are times when it would be really useful to be able to see assemblies from front and rear at the same time.Servo installation is fast and reliable using the quick-release servo mount.The mounting plates are simply positioned either in front of the servo or behind it - whichever is more...

Prix 9,80 €
Détails
En vente sur demande
Y-lead Aperçu rapide

Référence: 3936/1

Y-lead

Commentaire(s): 0

If you want to operate two servos in parallel from one receiver channel you requires a Y-lead.

Prix 14,80 €
Détails
En vente sur demande
Glue dispenser Aperçu rapide

Référence: 10/75

Glue dispenser

Commentaire(s): 0

When you insert cartridges Ord.No. 10/73 into the dispenser and press the components through the mixing nozzle the epoxy is ready for immediate use.

Prix 49,80 €
Détails
En vente sur demande
Screw fitting pushrod... Aperçu rapide

Référence: 97/9

Screw fitting pushrod connector

Commentaire(s): 0

Screw fixing pushrod connectors can be used on bell-cranks and servo output arms at the tail rotor servo, so that the tail rotor pushrod can quickly be installed, disconnected and adjusted. A further advantage is that a hardened steel pushrod can be used. For one helicopter you need two pushrod connectors.Caution during installation: the barrel of the...

Prix 6,30 €
Détails
En vente sur demande
Servo linkage set Aperçu rapide

Référence: 97/4

Servo linkage set

Commentaire(s): 0

When you build your first model helicopter you will find all the linkage components required to connect the servos to the mechanics supplied with the RC set (German radio systems only). When you come to installing servos in other models you can use this servo linkage set which contains all the link balls, screws, nuts and screw-fitting pushrod...

Prix 46,10 €
Détails
En vente sur demande

Seguici su Facebook

Facebook