BENZIN Acrobatic

Riferimento: 830/18

Pignone, 8 mm, 18 denti

Barra filettata M3 x 200 mm per fissaggio del trave di coda sul modello trainer foxy

Riferimento: 830/21

Ingranaggio 8 mm 21 denti

Rinforzo

Riferimento: 830/23

Ingranaggio 8 mm 23 denti

I pattini sono disponibili separatamente per realizzare combinazioni originali: stabilizzatore bianco e pattino rosso! Per il fissaggio dei pattini utilizzate viti con testa cilindrica M2 x 8...

Riferimento: 830/85

Ingranaggio principale 36 mm, 85 denti

Al posto di un elevatore (per il montaggio sul tubo coda) questo impennaggio ha una pinna. Questa pinna e posizionata verso l'esterno sulla parte opposta al rotore di coda.altezza 220 mm, misurata...

Riferimento: 830/87

Ingranaggio principale 87 denti

Riferimento: 830/90

Ingranaggio principale a 90 denti

Contenuto per confezione 1 pezzo

Riferimento: 830/68

Rete a benzina fine e filtro a cherosene

Chemical analysis used in Formel 1 is able to determine 1 g of impurity within 1 ton of oil. To fulfill your demand on the cleanness of the fuel for your model helicopter you use the fine-mesh petrol filter inside the fuel tubing between the tank and the carburettor. Also suitable for kerosine turbine fuel.

Riferimento: 830/83

Tubo benzina benzina 1 m

Fuel tubing for petrolapprox. 1 mtransparentFuel tubing inevitably suffers from the effects of ageing. Always replace brittle tubing before it gives problems! 

Riferimento: 830/101

Electric Benzin Conversion Kit, 6mm shaft

Benzin-Trainer to electric conversion?..why not! Here is a rather simple way to convert your Benzin Trainer to electric power. Remove the Petrol motor and exhaust and replace it with an electric motor of your choice. The motor mount retrofit set can be used with the most common electric motors. This conversion set can also be used with the Benzin fuselage...

Riferimento: 834/41

Toothed belt, XL/190

Toothed belt for BENZIN Acrobatic.

Riferimento: 890/12

Spacer set

Spacer set Content of package: 4 pieces.

Riferimento: 834/16

Silencer for BENZIN Acrobatic

Silencer for the helicopters of the series BENZIN Acrobatic

Riferimento: 830/2

Extractor screw

Extractor screwkey size 13for flywheel and split tapper collet on petrol engines

Riferimento: 1022/13

Carburettor intake trumpet

This screw-fitting carburettor intake trumpet is designed to improve the flow of air entering the carburettor. Complete with screws and gasket.

Riferimento: 830/3

Cooling fan puller for the G230 petrol engine

If you wish to install an electric on-board starter on a petrol engine, you will need to remove the existing cooling fan and replace it with a different one. The fan can only be removed using a puller.If you don't have the right tool, removing the fan often turns out to be a difficult task.We have designed the fan puller specifically for this purpose, so...

Riferimento: 3274

AXON - Bavarian Demon

Riferimento: 125

12 mm sliding bar