Home
Marchi

Nessuna marca

Fornitori
Migliori vendite
Flanged ballrace 6 x 10 x 3 mm Anteprima

Riferimento: 92/91

Flanged ballrace 6 x 10 x 3 mm

Recensioni: 0

Ballraces are used wherever moving parts are required to run with a minimum of play and a minimum of friction. The more ballraces are used, the more smoothly the mechanics of a helicopter works, and the lower the rate of wear. The dimensions of a ballrace mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness. For flanged bearings the same...

Prezzo 14,70 €
Più
In vendita su richiesta
Tutte le migliori vendite

Hub-bell for driven tail rotor

36/45
Valutazione 

Provided that you maintain your model helicopter conscientiously and set it up according to the instructions, the model's flying load limits are well outside its normal flight envelope.
Detail features of the kit are designed to suit normal applications, but different parts can be retro-fitted at any time, e.g. if you wish to convert a Kobold into a mechanical system for a full-fuselage model. To extend the load limits further you can use this freewheel and/or this hub (if you want a driven tail rotor for auto-rotation). However, both must only be used in conjunction with the pinion shaft 41/25. The outside diameter is 59 mm in both cases.
Hub, reinforced, for driven tail rotor, with internal-tooth gear

87,20 €
Tasse incluse
Quantità
In vendita su richiesta

 

Política de seguridad

 

Política de envío

 

Política de devolución

Descrizione

Provided that you maintain your model helicopter conscientiously and set it up according to the instructions, the model's flying load limits are well outside its normal flight envelope.
Detail features of the kit are designed to suit normal applications, but different parts can be retro-fitted at any time, e.g. if you wish to convert a Kobold into a mechanical system for a full-fuselage model. To extend the load limits further you can use this freewheel and/or this hub (if you want a driven tail rotor for auto-rotation). However, both must only be used in conjunction with the pinion shaft 41/25. The outside diameter is 59 mm in both cases.
Hub, reinforced, for driven tail rotor, with internal-tooth gear

Dettagli del prodotto
36/45
Recensioni

Ancora nessuna recensione da parte degli utenti.

Scrivi la tua recensione

Hub-bell for driven tail rotor

Hub-bell for driven tail rotor

Provided that you maintain your model helicopter conscientiously and set it up according to the instructions, the model's flying load limits are well outside its normal flight envelope.
Detail features of the kit are designed to suit normal applications, but different parts can be retro-fitted at any time, e.g. if you wish to convert a Kobold into a mechanical system for a full-fuselage model. To extend the load limits further you can use this freewheel and/or this hub (if you want a driven tail rotor for auto-rotation). However, both must only be used in conjunction with the pinion shaft 41/25. The outside diameter is 59 mm in both cases.
Hub, reinforced, for driven tail rotor, with internal-tooth gear

Scrivi la tua recensione
16 otros productos en la misma categoría:

Seguici su Facebook

Facebook