Home
Marchi

Nessuna marca

Fornitori
Migliori vendite
Flanged ballrace 6 x 10 x 3 mm Anteprima

Riferimento: 92/91

Flanged ballrace 6 x 10 x 3 mm

Recensioni: 0

Ballraces are used wherever moving parts are required to run with a minimum of play and a minimum of friction. The more ballraces are used, the more smoothly the mechanics of a helicopter works, and the lower the rate of wear. The dimensions of a ballrace mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness. For flanged bearings the same...

Prezzo 14,70 €
Più
In vendita su richiesta
Aste 3,0 x 75 mm Anteprima

Riferimento: 70/76

Aste 3,0 x 75 mm

Recensioni: 0

Ready-made pushrod, threaded M 3. Content of the package: 1 piece

Prezzo 6,30 €
Più
In vendita su richiesta
Tutte le migliori vendite

Tiger manifold, 35 mm

903/8
Valutazione 



The various exhaust manifolds differ in shape and in the size of the flange, to match different engines' exhaust stubs. The term "exhaust hole spacing" refers to the holes on either side of the exhaust port, measured between hole centres.

Please check before you order that you have selected the correct manifold to match your model and engine. Measure again to be on the safe side!

131,70 €
Tasse incluse
Quantità
In vendita su richiesta

 

Política de seguridad

 

Política de envío

 

Política de devolución

Descrizione



The various exhaust manifolds differ in shape and in the size of the flange, to match different engines' exhaust stubs. The term "exhaust hole spacing" refers to the holes on either side of the exhaust port, measured between hole centres.

Please check before you order that you have selected the correct manifold to match your model and engine. Measure again to be on the safe side!

Dettagli del prodotto
903/8
Recensioni

Ancora nessuna recensione da parte degli utenti.

Scrivi la tua recensione

Tiger manifold, 35 mm

Tiger manifold, 35 mm



The various exhaust manifolds differ in shape and in the size of the flange, to match different engines' exhaust stubs. The term "exhaust hole spacing" refers to the holes on either side of the exhaust port, measured between hole centres.

Please check before you order that you have selected the correct manifold to match your model and engine. Measure again to be on the safe side!

Scrivi la tua recensione
16 autres produits dans la même catégorie :
Slot head set Aperçu rapide

Référence: 111/30

Slot head set

Commentaire(s): 0

The kit contains: Ord.No. 11/51      PH0, PH1 Ord.No. 11/52      SW 2,5 / 4,0 Ord.No. 111/31    SW 2,0 / 3,5 Ord.No. 111/32    PH000, PH00 Ord.No. 111/33    PZ0, PZ1

Prix 75,60 €
Détails
En vente sur demande
Penetrating oil Aperçu rapide

Référence: 10/38

Penetrating oil

Commentaire(s): 0

When flying in moist air or rainy conditions you may find that rust starts to form on shafts. If this happens you could find that the swashplate is stuck fast the following day. A quick spray of penetrating oil will prevent oxidation getting a hold on the swashplate. Use it on the main rotor shaft and tail rotor shaft after flying; a few little squirts...

Prix 13,40 €
Détails
En vente sur demande
Crankshaft nut socket... Aperçu rapide

Référence: 11/62

Crankshaft nut socket spanner 13 mm

Commentaire(s): 0

If you want to tighten the crankshaft nut on your engine fully, and still be able to loosen it again without problems, you need the correct size of crankshaft socket spanner. Note, however, that different engines require different sizes, so take care to order the correct item. Crankshaft nut socket spanner 13 mm, for Rossi or Webra

Prix 23,90 €
Détails
En vente sur demande
Swivel bearing 10 x 19 x 9 mm Aperçu rapide

Référence: 68/1

Swivel bearing 10 x 19 x 9 mm

Commentaire(s): 0

A swivel bearing is fitted with a ball which is capable of rotation in all directions; this application is used in the swashplate. The dimensions of a swivel bearing mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness.  Swivel bearing 10 x 19 x 9 mmpack of 1

Prix 30,60 €
Détails
En vente sur demande
9.5 x 22 x 5.5 imperial Aperçu rapide

Référence: 64/0

9.5 x 22 x 5.5 imperial

Commentaire(s): 0

Ballraces are used wherever moving parts are required to run with a minimum of play and a minimum of friction. The more ballraces are used, the more smoothly the mechanics of a helicopter works, and the lower the rate of wear. The dimensions of a ballrace mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness.  Ballrace 9.5 x 22 x 5.5...

Prix 12,80 €
Détails
En vente sur demande
Silicone hose Aperçu rapide

Référence: 116/8

Silicone hose

Commentaire(s): 0

The operating temperature of a tuned pipe or of a silencer has a destructive influence on their supports, if no heat resitant material is used when fixing.Silicone hose11 mm I.D.length approx. 300 mm

Prix 7,40 €
Détails
En vente sur demande
Thrust bearing 8 x 15 x 5 mm Aperçu rapide

Référence: 117/8

Thrust bearing 8 x 15 x 5 mm

Commentaire(s): 0

High centrifugal forces cannot be absorbed by a radial bearing. For that application we use a 3-part thrust bearing (axial bearing) consisting of a loose ring, a ball cage and a fixed ring: the parts are installed in this sequence. The dimensions of a ballrace mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness.  Thrust bearing 8 x 15 x 5...

Prix 17,00 €
Détails
En vente sur demande
Five minute epoxy, 50 ml Aperçu rapide

Référence: 10/73

Five minute epoxy, 50 ml

Commentaire(s): 0

The more you build, the more frequently you use epoxies, whose components must be proportionately mixed. When you insert cartridges into the dispenser and press the components through the mixing nozzle the epoxy is ready for immediate use. Pack of 50 ml, pot life approx. 5 minutes

Prix 18,60 €
Détails
En vente sur demande
6 x 19 x 6 mm Aperçu rapide

Référence: 38/1

6 x 19 x 6 mm

Commentaire(s): 0

Ballraces are used wherever moving parts are required to run with a minimum of play and a minimum of friction. The more ballraces are used, the more smoothly the mechanics of a helicopter works, and the lower the rate of wear. The dimensions of a ballrace mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness.  Ballrace 6 x 19 x 6 mmpack of...

Prix 13,50 €
Détails
En vente sur demande
12 x 28 x 8 mm Aperçu rapide

Référence: 55/8

12 x 28 x 8 mm

Commentaire(s): 0

Ballraces are used wherever moving parts are required to run with a minimum of play and a minimum of friction. The more ballraces are used, the more smoothly the mechanics of a helicopter works, and the lower the rate of wear. The dimensions of a ballrace mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness.  Ballrace 12 x 28 x 8 mmpack of...

Prix 14,80 €
Détails
En vente sur demande
pinion gear 23-tooth Aperçu rapide

Référence: 64/32

pinion gear 23-tooth

Commentaire(s): 0

Clutch pinion gearincl. flywheel and split taper collet23-toothmodule 1material: aluminiumtwin ballracedincl. clutch liningfits the glow plug motor

Prix 98,90 €
Détails
En vente sur demande
Flanged ballrace 6 x 10 x 3 mm Aperçu rapide

Référence: 92/91

Flanged ballrace 6 x 10 x 3 mm

Commentaire(s): 0

Ballraces are used wherever moving parts are required to run with a minimum of play and a minimum of friction. The more ballraces are used, the more smoothly the mechanics of a helicopter works, and the lower the rate of wear. The dimensions of a ballrace mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness. For flanged bearings the same...

Prix 14,70 €
Détails
En vente sur demande
Spray can holder Aperçu rapide

Référence: 16/3

Spray can holder

Commentaire(s): 0

This spray can holder can be used with any spray can, and makes it easier to apply the paint evenly. The holder provides an effective means of controlling the spray coat; an additional advantage is that your hands stay clean, as they don't make contact with the paint.

Prix 11,90 €
Détails
En vente sur demande
Thrust bearing 10 x 24 x 9 mm Aperçu rapide

Référence: 117/2

Thrust bearing 10 x 24 x 9 mm

Commentaire(s): 0

High centrifugal forces cannot be absorbed by a radial bearing. For that application we use a 3-part thrust bearing (axial bearing) consisting of a loose ring, a ball cage and a fixed ring: the parts are installed in this sequence. The dimensions of a ballrace mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness.  Thrust bearing 10 x 24 x 9...

Prix 30,60 €
Détails
En vente sur demande
8 x 14 x 4 mm Aperçu rapide

Référence: 17/24

8 x 14 x 4 mm

Commentaire(s): 0

Ballraces are used wherever moving parts are required to run with a minimum of play and a minimum of friction. The more ballraces are used, the more smoothly the mechanics of a helicopter works, and the lower the rate of wear. The dimensions of a ballrace mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness.  Ballrace 8 x 14 x 4 mmpack of...

Prix 17,00 €
Détails
En vente sur demande

Seguici su Facebook

Facebook