Home
Marchi

Nessuna marca

Fornitori
Migliori vendite
Flanged ballrace 6 x 10 x 3 mm Anteprima

Riferimento: 92/91

Flanged ballrace 6 x 10 x 3 mm

Recensioni: 0

Ballraces are used wherever moving parts are required to run with a minimum of play and a minimum of friction. The more ballraces are used, the more smoothly the mechanics of a helicopter works, and the lower the rate of wear. The dimensions of a ballrace mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness. For flanged bearings the same...

Prezzo 14,70 €
Più
In vendita su richiesta
Aste 3,0 x 75 mm Anteprima

Riferimento: 70/76

Aste 3,0 x 75 mm

Recensioni: 0

Ready-made pushrod, threaded M 3. Content of the package: 1 piece

Prezzo 6,30 €
Più
In vendita su richiesta
Tutte le migliori vendite

Glazing panel shears straight

11/260
Valutazione 

These powerful, sharp shears simplify the task of cutting out vacuum-moulded bodywork components. Glazing panels, dummy fuel tanks etc. are easily cut out along the moulded-in lines using these special shears.
We suggest not to cut out anything until you satisfy yourself with the exact dimensions. This is because GRP parts (fuselages etc.) are hand made and small differences might occur in manufacturing process.
The comfortable handles and short blades make the cutting of curved lines an easy matter.

32,30 €
Tasse incluse
Quantità
In vendita su richiesta

 

Política de seguridad

 

Política de envío

 

Política de devolución

Descrizione

These powerful, sharp shears simplify the task of cutting out vacuum-moulded bodywork components. Glazing panels, dummy fuel tanks etc. are easily cut out along the moulded-in lines using these special shears.
We suggest not to cut out anything until you satisfy yourself with the exact dimensions. This is because GRP parts (fuselages etc.) are hand made and small differences might occur in manufacturing process.
The comfortable handles and short blades make the cutting of curved lines an easy matter.

Dettagli del prodotto
11/260
Recensioni

Ancora nessuna recensione da parte degli utenti.

Scrivi la tua recensione

Glazing panel shears straight

Glazing panel shears straight

These powerful, sharp shears simplify the task of cutting out vacuum-moulded bodywork components. Glazing panels, dummy fuel tanks etc. are easily cut out along the moulded-in lines using these special shears.
We suggest not to cut out anything until you satisfy yourself with the exact dimensions. This is because GRP parts (fuselages etc.) are hand made and small differences might occur in manufacturing process.
The comfortable handles and short blades make the cutting of curved lines an easy matter.

Scrivi la tua recensione
16 other products in the same category:
Flywheel puller Quick view

Reference: 64/2

Flywheel puller

Review(s): 0

If the flywheel of the clutch is sitting to tight on the tapper of the collet you can use this flywheel puller.For this purpose you remove the nut from the crankshaft, then put the puller on the crankshaft, and turn both socket-head cap screws equally approx. 5 mm into the thread of the flywheel; the flywheel loosens now.The length of the socket-head cap...

Price 11.20€
More
On sale upon request
Tail blade balance shaft Quick view

Reference: 34/9

Tail blade balance shaft

Review(s): 0

If the tail rotor blades are to be balanced accurately, the assembled hub must be included in the balance process. Now you can balance the tail rotor perfectly, and the unit's smooth running will prove it!

Price 17.00€
More
On sale upon request
Tool case Quick view

Reference: 21/11

Tool case

Review(s): 0

Tool case, complete empty, alone, including foam to cutsize approx. 275 x 230 x 83 mm

Price 19.10€
More
On sale upon request
Die M 2.0 HSS Quick view

Reference: 70/21

Die M 2.0 HSS

Review(s): 0

Our easy-to-use dies are made of top-quality HSS steel. The bevelled entry to the dies ensures that the thread always starts exactly "square" and cuts cleanly. Good thread-cutting oil is as important as the die itself, as it extends the useful life of the tool several times over.

Price 54.60€
More
On sale upon request
Glasspaper file, flat Quick view

Reference: 11/28

Glasspaper file, flat

Review(s): 0

If you enjoy building full-fuselage models you cannot help but appreciate practical tools which make your work easier. The glasspaper file is ideal for final trimming of openings for windows, doors and vent grilles after machining them out. The file is 25 cm long overall, with a sanding area 13 cm long and 2.5 cm wide on each side. The file is supplied...

Price 14.80€
More
On sale upon request
Die M 3.0 HSS Quick view

Reference: 70/22

Die M 3.0 HSS

Review(s): 0

Our easy-to-use dies are made of top-quality HSS steel. The bevelled entry to the dies ensures that the thread always starts exactly "square" and cuts cleanly. Good thread-cutting oil is as important as the die itself, as it extends the useful life of the tool several times over.

Price 37.80€
More
On sale upon request
File set with handle, six-part Quick view

Reference: 90/10

File set with handle, six-part

Review(s): 0

This special file set is particularly useful when you are cutting small openings, as they can be used to work on the tiniest of radii and straight edges. The rotary-action handle makes quick work of swapping individual tools. The collet can also be used to grip drills and taps of 2 to 5 mm ∅.

Price 17.00€
More
On sale upon request
Rotor blade allen key for... Quick view

Reference: 11/34

Rotor blade allen key for M6 socket-head screws

Review(s): 0

Rotor blades for large-scale model helicopters must be secured using screws of the appropriate size. Normally M4 bolts are employed, but here the usual size is M6. The T-handle of this M6 allen key provides plenty of torque, but you should only tighten the screws to the point where the blades can still align themselves at start-up.

Price 11.70€
More
On sale upon request
Pushrod measuring holder Quick view

Reference: 11/86

Pushrod measuring holder

Review(s): 0

Model helicopter building instructions always state pushrod length as measured from ball centre to ball centre.Determining this dimension using conventional measuring tools is not really much more accurate than estimating the length.Pushrod measuring holderpack of 2holders fit any standard calipers

Price 14.80€
More
On sale upon request
Hole cutter up to 16 mm Ø Quick view

Reference: 11/64

Hole cutter up to 16 mm Ø

Review(s): 0

There are far more holes to be drilled in a helicopter fuselage than just the ordinary air inlet holes. Think of the access holes for the needle valve and the glow plug, openings for the exhaust manifold and the initial stage of cutting window openings. This hole cutter does an excellent job. Hole cutter, up to 16 mm. Here a few hints for making perfect...

Price 54.60€
More
On sale upon request
Tubing cutter, up to 15 mm Ø Quick view

Reference: 11/60

Tubing cutter, up to 15 mm Ø

Review(s): 0

The tubing cutter can handle aluminium, stainless steel and brass tubing up to 15 mm diameter. It can also be used to form a slight internal burr on tubing. For example if you use a tail rotor pushrod running in a PTFE sleeve in aluminium tubing, you can cut the aluminium to length at both ends with the tubing cutter, and the PTFE sleeve will not slip out.

Price 33.30€
More
On sale upon request
Ball-link driver 5.5 Quick view

Reference: 107/1

Ball-link driver 5.5

Review(s): 0

This tiny tool is designed to help you screw pushrods into ball-links. It can either be used in the chuck of an electric drill, in the telescopic handle, or in a 5.5 mm socket.  Ball-link driverfor 5.5 mm socket spanner

Price 8.40€
More
On sale upon request
Ball-link driver with handle Quick view

Reference: 107/0

Ball-link driver with handle

Review(s): 0

This tiny tool is designed to help you screw pushrods into ball-links. It can either be used in the chuck of an electric drill, in the telescopic handle, or in a 5.5 mm socket.  Ball-link driverwith telescopic handle 11/44

Price 27.40€
More
On sale upon request

Seguici su Facebook

Facebook