Balancin

Reference: 702/97

Linkage ball

Not available

Reference: 79/25

Flybar stainless steel 5 x 530 mm

The length of the flybar itself also plays an important role in the model's flight characteristics: the longer the flybar, the smoother the hover. A longer flybar increases the control deflections. 450 mm length is considered normal, while 510 mm provides more docile handling.

Reference: 703/340

Washer for fastening multi-blade head

Not available

Reference: 87/15

Double ball-link for rotor head

 Double ball-linkpack of 2

Reference: 707/3

Rotor head cover for 3-blade head

155 mm diameter

Reference: 832/66

Ball-collet with double ball

The use of ball-collets makes it possible to attach double ball-links to the flybar; this automatically sets the correct rocker spacing. The double-ball on these ball-collets also provides an adjustment facility for the VR-22 rotor head, as the double ball-link can always be set vertical by connecting it to the inside or outside ball - provided that the...

Reference: 54/13

Clamp ring pitch compensator 10 mm

On longer rotor shafts the clamp ring for the pitch compensator sits underneath of the centre piece directly on the rotor shaft.Clamp ring for pitch compensator 10 mm Ø, length of the pin 30 mm.

Reference: 72/10

Rotor head centre piece

Rotor head centre piece for 2-bladed rotor head.

Reference: 702/79

Flybar stainless steel 5 x 270 mm

Pack of 2

Reference: 74/3

O-ring 1 x 4 mm soft

content of the package: 8 pieces

Reference: 832/75

Thrust washer

Thrust washer for rotor head Content of the package: 2 pieces

Reference: 705/33

5-blade centre piece 12 mm

Component part for a multi-blade rotor head for 12 mm Ø main shaft; see Ord.No. 703/32, 704/32 resp. 705/32.

Reference: 80/30

Control bridge 2-part metal, 5 mm

Control bridge 2-part metal, for 5 mm ∅ flybar.

Reference: 76/15

GRP blade holder reinforced

Blade holder, GRP, reinforced

Reference: 74/18

O-ring 2 x 19 mm soft

O-ring 2 x 19 mm soft Content of the package: 8 pieces Tip: O-rings always slide with a drop of silicone oil onto the shaft.

Reference: 1005/8

Kit de conversión varillaje directo para JetRanger XL eléctrico