Home
Marchi

Nessuna marca

Fornitori
Migliori vendite
Flanged ballrace 6 x 10 x 3 mm Anteprima

Riferimento: 92/91

Flanged ballrace 6 x 10 x 3 mm

Recensioni: 0

Ballraces are used wherever moving parts are required to run with a minimum of play and a minimum of friction. The more ballraces are used, the more smoothly the mechanics of a helicopter works, and the lower the rate of wear. The dimensions of a ballrace mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness. For flanged bearings the same...

Prezzo 14,70 €
Più
In vendita su richiesta
Aste 3,0 x 75 mm Anteprima

Riferimento: 70/76

Aste 3,0 x 75 mm

Recensioni: 0

Ready-made pushrod, threaded M 3. Content of the package: 1 piece

Prezzo 6,30 €
Più
In vendita su richiesta
Tutte le migliori vendite

Mixer lever cranked

78/41
Valutazione 



Mixer lever, content of the package 1 piece.

Additionial accessories for the use of mixer levers are either two flanged ballraces or two flanged bushes from Delrin as a low cost alternative.
The screwing on the blade holder arm complies with the kind of hole, i.e. it depends on the through hole or on the blind hole.

Please note for choosing the screws: blade holder 76/15 = socket-head cap screw 90075, blade holder 76/13 = socket-head cap screw 90085 with self-locking nut 90530.

17,00 €
Tasse incluse
Quantità
In vendita su richiesta

 

Política de seguridad

 

Política de envío

 

Política de devolución

Descrizione



Mixer lever, content of the package 1 piece.

Additionial accessories for the use of mixer levers are either two flanged ballraces or two flanged bushes from Delrin as a low cost alternative.
The screwing on the blade holder arm complies with the kind of hole, i.e. it depends on the through hole or on the blind hole.

Please note for choosing the screws: blade holder 76/15 = socket-head cap screw 90075, blade holder 76/13 = socket-head cap screw 90085 with self-locking nut 90530.

Dettagli del prodotto
78/41
Recensioni

Ancora nessuna recensione da parte degli utenti.

Scrivi la tua recensione

Mixer lever cranked

Mixer lever cranked



Mixer lever, content of the package 1 piece.

Additionial accessories for the use of mixer levers are either two flanged ballraces or two flanged bushes from Delrin as a low cost alternative.
The screwing on the blade holder arm complies with the kind of hole, i.e. it depends on the through hole or on the blind hole.

Please note for choosing the screws: blade holder 76/15 = socket-head cap screw 90075, blade holder 76/13 = socket-head cap screw 90085 with self-locking nut 90530.

Scrivi la tua recensione
16 other products in the same category:
O-ring 3 x 12 mm hard Quick view

Reference: 74/12

O-ring 3 x 12 mm hard

Review(s): 0

O-ring 3 x 12 mm hard Content of the package: 8 pieces Tip: O-rings always slide with a drop of silicone oil onto the shaft.

Price 5.50€
More
On sale upon request
Flybar stainless steel 4 x... Quick view

Reference: 79/21

Flybar stainless steel 4 x 320 mm

Review(s): 0

The length of the flybar itself also plays an important role in the model's flight characteristics: the longer the flybar, the smoother the hover. A longer flybar increases the control deflections. 450 mm length is considered normal, while 510 mm provides more docile handling.

Price 17.00€
More
On sale upon request
Bearing pin Quick view

Reference: 68/19

Bearing pin

Review(s): 0

Bearing pin for swashplate driver 68/20. Content of the package: 1 piece.

Price 11.20€
More
On sale upon request
Flybar stainless steel 4 x... Quick view

Reference: 79

Flybar stainless steel 4 x 450 mm

Review(s): 0

The length of the flybar itself also plays an important role in the model's flight characteristics: the longer the flybar, the smoother the hover. A longer flybar increases the control deflections. 450 mm length is considered normal, while 510 mm provides more docile handling.

Price 17.00€
More
On sale upon request
Mixer lever set Quick view

Reference: 78/40

Mixer lever set

Review(s): 0

Mixer levers are an essential part of every flybar-controlled rotor head. From the swashplate a pushrod runs to the ballraced mixer arm which is screwed to the blade holder arm. The mixer levers transmit the control movement to the flybar via the double ball-link.Additionial accessories for the use of mixer levers are either two flanged ballraces or two...

Price 37.50€
More
On sale upon request
Thrust washer Quick view

Reference: 832/75

Thrust washer

Review(s): 0

Thrust washer for rotor head Content of the package: 2 pieces

Price 13.50€
More
On sale upon request
O-ring 2.5 x 13 mm soft Quick view

Reference: 74/17

O-ring 2.5 x 13 mm soft

Review(s): 0

O-ring 2.5 x 13 mm soft Content of the package: 8 pieces Tip: O-rings always slide with a drop of silicone oil onto the shaft.

Price 6.30€
More
On sale upon request

Seguici su Facebook

Facebook