Accueil
Marques

No brand

Fournisseurs
Meilleures Ventes
Flanged ballrace 6 x 10 x 3 mm Aperçu rapide

Référence: 92/91

Flanged ballrace 6 x 10 x 3 mm

Commentaire(s): 0

Ballraces are used wherever moving parts are required to run with a minimum of play and a minimum of friction. The more ballraces are used, the more smoothly the mechanics of a helicopter works, and the lower the rate of wear. The dimensions of a ballrace mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness. For flanged bearings the same...

Prix 14,70 €
Détails
En vente sur demande
Toutes les meilleures ventes

Il y a 22 produits.

Trier par :
Pertinence Nom, A à Z Nom, Z à A Prix, croissant Prix, décroissant
Affichage 13-22 de 22 article(s)

Filtres actifs

Tap M 3.0 HSS Aperçu rapide

Référence: 11/78

Tap M 3.0 HSS

Commentaire(s): 0

Good thread-cutting oil is as important as the tap, as it extends the useful life of the tool several times over.

Prix 28,10 €
Détails
En vente sur demande
Tap M 4.0 HSS Aperçu rapide

Référence: 11/79

Tap M 4.0 HSS

Commentaire(s): 0

Good thread-cutting oil is as important as the tap, as it extends the useful life of the tool several times over.

Prix 19,90 €
Détails
En vente sur demande
Twist drill 8.0 mm Aperçu rapide

Référence: 11/81

Twist drill 8.0 mm

Commentaire(s): 0

When screwing together parts in the mechanics (direct linkage) Allen screws are preferable to normal screws; use M 2.5 for Futaba servos and M 3 for Graupner / JR servos. We supply all required sizes of drills and taps for the work on your model helicopter.

Prix 5,50 €
Détails
En vente sur demande
Twist drill 1.8 mm Aperçu rapide

Référence: 11/87

Twist drill 1.8 mm

Commentaire(s): 0

When screwing together parts in the mechanics (direct linkage) Allen screws are preferable to normal screws; use M 2.5 for Futaba servos and M 3 for Graupner / JR servos. We supply all required sizes of drills and taps for the work on your model helicopter.

Prix 5,50 €
Détails
En vente sur demande
Twist drill 3.2 mm Aperçu rapide

Référence: 11/88

Twist drill 3.2 mm

Commentaire(s): 0

When screwing together parts in the mechanics (direct linkage) Allen screws are preferable to normal screws; use M 2.5 for Futaba servos and M 3 for Graupner / JR servos. We supply all required sizes of drills and taps for the work on your model helicopter.

Prix 5,50 €
Détails
En vente sur demande
Ratchet tool holder Aperçu rapide

Référence: 90/5

Ratchet tool holder

Commentaire(s): 0

When you need a threaded hole in a workpiece, you just drill a core hole, then drive a tap into it to cut the thread. The best method of thread-cutting by hand is to use a ratchet tool holder, as this gives you the best chance of keeping the thread "straight". The ratchet can be switched to right-hand and left-hand locking, plus a rigid (no ratchet)...

Prix 37,80 €
Détails
En vente sur demande
Retour en haut

Suivez-nous sur Facebook

Facebook