Outillages/colles/lubrifiants

Référence: 11/91

Open-end spanner, size 4 and 5

For real pleasure in modelling a comprehensive set of tools is indispensable, as it ensure that you always have the right tool for the job on hand. These small open-ended spanners are perfect for tightening or undoing standard and self-locking nuts, in the sizes M 2, M 2.5, M 3, M 4 etc. The range available covers all the sizes which are required for a...

Référence: 11/92

Open-end spanner, size 4.5 and 5.5

For nut M 2 (flat) + nut M 3. For real pleasure in modelling a comprehensive set of tools is indispensable, as it ensure that you always have the right tool for the job on hand. These small open-ended spanners are perfect for tightening or undoing standard and self-locking nuts, in the sizes M 2, M 2.5, M 3, M 4 etc. The range available covers all the...

Référence: 10/4

Collective pitch adjustment jig

Référence: 11/93

Open-end spanner, size 6 and 7

For nut M 3.5 + nut M 4. For real pleasure in modelling a comprehensive set of tools is indispensable, as it ensure that you always have the right tool for the job on hand. These small open-ended spanners are perfect for tightening or undoing standard and self-locking nuts, in the sizes M 2, M 2.5, M 3, M 4 etc. The range available covers all the sizes...

Référence: 11/43

Hole-cutter, 3 to 14 mm diameter, with handle

The pointed tip and the extremely sharp, double-edged blade of this tool are particularly good for cutting holes in thin materials such as GRP and other plastics. The hole-cutter requires no centre-punching and no pilot-hole, and produces a neat hole of infinitely variable diameter within the range 3 to 14 mm. The handle doubles as protection and storage...

Référence: 11/55

Tap M 5.0 HSS

Good thread-cutting oil is as important as the tap, as it extends the useful life of the tool several times over.

Référence: 10/41

Digital collective pitch adjustment jig

Not available

Référence: 11/68

Twist drill 6.0 mm

We supply all required sizes of drills and taps for the work on your model helicopter.

Référence: 11/94

Open-end spanner, size 7 and 8

For nut M 4 + nut M 5. For real pleasure in modelling a comprehensive set of tools is indispensable, as it ensure that you always have the right tool for the job on hand. These small open-ended spanners are perfect for tightening or undoing standard and self-locking nuts, in the sizes M 2, M 2.5, M 3, M 4 etc. The range available covers all the sizes...

Référence: 11/69

Drill set 4-part

Most hardware stores offer a very good range of tools like drills. However, when you need special sizes for our special helicopter application, it is very helpful to have a drill set handy which includes exactly the right diameters.  Typical applications: Drill 1.8 mm Ø for flange-head self-tapping screwsDrill 2.0 mm Ø for M 2.5 threadsDrill 2.5 mm...

Référence: 68/17

Swashplate jig

Use this swashplate jig to adjust the pushrods of the X-Treme, X-PERIENCE, XLV and Robinson R22 mechanics.

Référence: 68/4

Swashplate jig

The pushrods from the swashplate to the rotor head must be set to identical lengths.Just slip the swashplate jig under the swashplate, and the swashplate will automatically be set parallel to the dome plate and at right-angles to the rotor shaft. You can now set up all your linkages with confidence.