Kit tringles pour X-Treme

Riferimento: 800/6

Stabilizzatore giallo

Instead of a horizontal fin (for mounting on the tail boom) the small inset horizontal panel replaces that. The inset fits on top of the stabiliser, outwards opposite of the tail rotor.220 mm high, excl. tail skid3-part, 45 g total weight

Riferimento: 118/62

Carrello di foto e video

Riferimento: 260/10

Supporto del braccio di coda

Tail boom support XLV.

Riferimento: 800/55

Set stabilizzatore, fibra di carbonio

Stabiliser set laminated of carbon2-part - extra lightweight!For installation at all trainers when the stabiliser holder Ord.No. 870/17 is present.250 mm high19.5 g total weight

Riferimento: 860/53

Domplatte, Alu

Riferimento: 870/24

Kühlluftschacht X-Treme, 4teilig

Riferimento: 809/7

Heckrohrhalter 20 mm

Riferimento: 860/30

CFK-Rohr 8 x 6 x 700 mm

Riferimento: 800/37

Supporto per tettuccio da 26 mm

The required length of the canopy holder is determined by the kind of canopy and the location of its fitting points on the side frames.

Riferimento: 870/40

Edelstahl-Trägerrohre 8 mm

Riferimento: 800/25

Stabilizzatore grande

If you fit a large stabiliser to your trainer there is no need for a tail skid. This stabiliser provides the tail rotor blades with enough ground clearance, and offers good flight stability at low airspeeds. There are two versions with different methods of attachment.275 mm high118 g total weightscrew fitting to tail rotor holder

Riferimento: 310/8

Supporto per tubi sintonizzato in 2 parti

GRP tuned pipe holders are used to secure the tuned pipe to the tail booms. They are easy to clamp in place. The tail pipe of the tuned pipe should be covered with silicone hose (Order No. 116/8), or with one of the tail pipes (Ord.No. 116/0 or 116/9), so that the heat of the pipe does not damage the holder.Tuned pipe holder, 2-partfor 20 mm ��tail boom

Riferimento: 802/50

Verbreiterungs-Set

Riferimento: 802/17

Supporto montante 25 mm

  Content of the package 1 piece

Riferimento: 860/31

Strebenanschluß-Hülse

Riferimento: 260/7

Supporto del braccio posteriore

Tail boom holder XLV.