Pushrod - CFK 4.0 x 1000 mm carbon fibre

Reference: 834/70

Tail boom holder, 25 mm

A 2-part GRP tail boom holder keeps a firm hold on the 25 mm ��tail boom. The tail boom holder is screwed between the side frames with socket-head cap screws M 3 x 55 (Ord.No. 90135).

Reference: 17/16

Stainless steel tube 6.0 x 0.3 x 950 mm

Advanced pilots appreciate the more precise control response of a rigid tail rotor drive system, as provided by a stainless steel drive shaft. Stainless steel tube 6.0 x 0.3 x 950 mm

Reference: 319

Tail boom 25 x 0.8 x 790 mm, silver

 Tail boom25 x 0.8 x 790 mmsilver

Reference: 309

Tail boom 20 x 0.8 x 710 mm, black

 Tail boom20 x 0.8 x 710 mmblack

Reference: 302/1

Tail boom 20 x 900 mm

Not available

Reference: 800/30

Heckrotorhalter

Reference: 332

Tail boom 31 x 1 x 1300 mm, black

 Tail boom31 x 1.0 x 1300 mmblack

Reference: 17/68

Mittenlagerungs-Set 25 mm

Reference: 800/28

Führung für 20 mm Heckrohr

Reference: 907/2

Servo mount

Use this special servo mount for installing the throttle servo on the base plate.

Reference: 809/70

Heckrohrhalter 25 mm

Reference: 17/15

Stainless steel tube 6 x 890 mm

Stainless steel tube 6.0 x 0.3 x 890 mm

Reference: 313

Tail boom 20 x 0.5 x 790 mm, black

 Tail boom20 x 0.5 x 790 mmblackweight 59 gTail booms with a wall thickness of 0.5 mm are specially tested for the use in models with electric drive only and must not be used for models powered by combustion engines! The wall thickness is just 0.5 mm for the reduction of weight. Comparative, the weight of a tail boom with 0.8 x 20 x 790 mm is 109 g.

Reference: 17/64

O-Ring 19 x 2 mm

Reference: 301

Tail boom 20 x 0.8 x 900 mm, titanium

 Tail boom20 x 0.8 x 900 mmtitanium

Reference: 321

Tail boom 25 x 0.8 x 910 mm, black

 Tail boom25 x 0.8 x 910 mmblack