Home

Filtra per

Disponibilità

Disponibilità

Prezzo

Prezzo

  • 4,00 € - 320,00 €

Categorie

Categorie

Marchi

Nessuna marca

Fornitori
Migliori vendite
Flanged ballrace 6 x 10 x 3 mm Anteprima

Riferimento: 92/91

Flanged ballrace 6 x 10 x 3 mm

Recensioni: 0

Ballraces are used wherever moving parts are required to run with a minimum of play and a minimum of friction. The more ballraces are used, the more smoothly the mechanics of a helicopter works, and the lower the rate of wear. The dimensions of a ballrace mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness. For flanged bearings the same...

Prezzo 14,70 €
Più
In vendita su richiesta
Aste 3,0 x 75 mm Anteprima

Riferimento: 70/76

Aste 3,0 x 75 mm

Recensioni: 0

Ready-made pushrod, threaded M 3. Content of the package: 1 piece

Prezzo 6,30 €
Più
In vendita su richiesta
Tutte le migliori vendite

Ci sono 147 prodotti.

Ordina per:
Rilevanza Nome, da A a Z Nome, da Z ad A Prezzo, da meno caro a più caro Prezzo, da più caro a meno caro
Visualizzati 49-60 su 147 articoli

Filtri attivi

  • Disponibilità: In magazzino
Flybar spirit level Anteprima

Riferimento: 79/1

Flybar spirit level

Recensioni: 0

To adjust the pitch of the main rotor blades accurately it is essential to set the flybar exactly horizontal. This is done by simply hanging a spirit level from the flybar. But make sure that the helicopter is standing on a level surface before you start!

Prezzo 17,00 €
Più
In vendita su richiesta
Twist drill 2.0 mm Anteprima

Riferimento: 11/71

Twist drill 2.0 mm

Recensioni: 0

When screwing together parts in the mechanics (direct linkage) Allen screws are preferable to normal screws; use M 2.5 for Futaba servos and M 3 for Graupner / JR servos. We supply all required sizes of drills and taps for the work on your model helicopter.

Prezzo 5,50 €
Più
In vendita su richiesta
Twist drill 2.5 mm Anteprima

Riferimento: 11/72

Twist drill 2.5 mm

Recensioni: 0

When screwing together parts in the mechanics (direct linkage) Allen screws are preferable to normal screws; use M 2.5 for Futaba servos and M 3 for Graupner / JR servos. We supply all required sizes of drills and taps for the work on your model helicopter.

Prezzo 5,50 €
Più
In vendita su richiesta
Widia disc cutter Anteprima

Riferimento: 29/11

Widia disc cutter

Recensioni: 0

Widia produced a tungsten carbide, derived from "like diamond - Wie Diamant (Ger)". The first Widia tools were available on the open market in 1923. They consisted at that time of approx. 94 % tungsten carbide and 6 % cobalt. Today's types contain additives that improve the hardness etc. The Widia disc cutter is ideal for cutting clean-edged openings in...

Prezzo 16,90 €
Più
In vendita su richiesta
Rotor head immobiliser Anteprima

Riferimento: 79/3

Rotor head immobiliser

Recensioni: 0

Working on the pitch adjustment of the main rotor blades requires a few conditions. First of all your helicopter must be standing on a flat level surface; the flybar must be horizontal and remain so throughout the procedure. The smooth running of all components with bearings makes this an almost impossible task because the slightest movement during pitch...

Prezzo 19,40 €
Più
In vendita su richiesta
Allen key set Anteprima

Riferimento: 111/20

Allen key set

Recensioni: 0

the kit contains:Ord.No. 11/47 SW 1,5Ord.No. 11/48 SW 2,0Ord.No. 11/49 SW 2,5Ord.No. 11/50 SW 3,0Ord.No. 11/54 SW 4,0

Prezzo 75,60 €
Più
In vendita su richiesta
Rotor blade allen key for... Anteprima

Riferimento: 33/11

Rotor blade allen key for M5 socket-head screws

Recensioni: 0

Rotor blades for large-scale model helicopters must be secured using screws of the appropriate size. Normally M4 bolts are employed, but here the usual size is M5. The T-handle of this M5 allen key provides plenty of torque, but you should only tighten the screws to the point where the blades can still align themselves at start-up.

Prezzo 11,70 €
Più
In vendita su richiesta
Twist drill 2.8 mm Anteprima

Riferimento: 11/73

Twist drill 2.8 mm

Recensioni: 0

When screwing together parts in the mechanics (direct linkage) Allen screws are preferable to normal screws; use M 2.5 for Futaba servos and M 3 for Graupner / JR servos. We supply all required sizes of drills and taps for the work on your model helicopter.

Prezzo 5,50 €
Più
In vendita su richiesta
Torna all'inizio

Seguici su Facebook

Facebook