Paddles

Riferimento: 68/19

Bearing pin

Bearing pin for swashplate driver 68/20. Content of the package: 1 piece.

Riferimento: 71/20

Compensatore di passo, VTR

Pitch compensator, complete, for 10 mm ∅ main shaft, centre piece GRP

Riferimento: 74/10

Anello 3 x 7 mm. duro

O-ring 3 x 7 mm hard Content of the package: 4 pieces Tip: O-rings always slide with a drop of silicone oil onto the shaft.

Riferimento: 54/13

Clamp ring pitch compensator 10 mm

On longer rotor shafts the clamp ring for the pitch compensator sits underneath of the centre piece directly on the rotor shaft.Clamp ring for pitch compensator 10 mm Ø, length of the pin 30 mm.

Riferimento: 702/90

Aluminium centre piece

Aluminium centre piece for 12 mm Ø main shaft

Riferimento: 74/21

O-ring 3.5 x 12 mm hard

O-ring 3.5 x 12 mm hard Content of the package: 8 pieces Tip: O-rings always slide with a drop of silicone oil onto the shaft.

Riferimento: 72/32

Shaft bearing

Shaft bearing Content of the package: 1 piece

Riferimento: 832/74

OR 9,00 x 4,5 mm

O-ring 9 x 4.5 mm Content of the package: 4 pieces Tip: O-rings always slide with a drop of silicone oil onto the shaft.

Riferimento: 702/10

Corpo centrale Elastomero

Elastomer 2-blade-centre piece, GRP.

Riferimento: 79/10

Asta stabilizzatore 4 x 510 mm

The length of the flybar itself also plays an important role in the model's flight characteristics: the longer the flybar, the smoother the hover. A longer flybar increases the control deflections. 450 mm length is considered normal, while 510 mm provides more docile handling.

Riferimento: 79

Flybar stainless steel 4 x 450 mm

The length of the flybar itself also plays an important role in the model's flight characteristics: the longer the flybar, the smoother the hover. A longer flybar increases the control deflections. 450 mm length is considered normal, while 510 mm provides more docile handling.

Riferimento: 702/91

Rocker for Bell 47 rotor head, silver

Not available

Riferimento: 832/78

Mixer lever, aluminium

This mixer lever from aluminium matches the dimensions of the rotor head 722/72 (e.g. model Robinson R22) with a max. rotor disc of 2 500 mm.

Riferimento: 79/25

Flybar stainless steel 5 x 530 mm

The length of the flybar itself also plays an important role in the model's flight characteristics: the longer the flybar, the smoother the hover. A longer flybar increases the control deflections. 450 mm length is considered normal, while 510 mm provides more docile handling.

Riferimento: 703/340

Washer for fastening multi-blade head

Not available

Riferimento: 1005/8

Kit de conversión varillaje directo para JetRanger XL eléctrico