R. H. conversion set X-Treme

Référence: 240/53

dome extension 78 mm

aluminum

Référence: 834/50

Side frame for BENZIN Acrobatic

The outstanding features of the BENZIN Acrobatic models are mainly based on these side frames. The engine moved to the front to optimise the CofG.Installation of an on-board electric starter as an option.CCPM - i.e. direct linkage at 4-points / 90 degreeInstallation of the tank below the main rotor shaft, i.e. while the tank runs dry the CofG does not...

Référence: 57/20

Pitch-axis crank set

 Content of the packagecomplete as shown

Référence: 257/53

Dome fittings set 2-blade T-Rex UH-1D / Bell 212

Not available

Référence: 44/5

Douille pour AC entraîné en AR

Bush, hardened.

Référence: 607/53

Set plato ciclico BO 105 T-Rex

Référence: 260/8

Douille 4 x 6 x 9,2 mm

Pack of 2

Référence: 36/4

Freewheel washer 5.9 x 11.9 mm

The freewheel disc is positioned on the spigot of the main rotor shaft, with the inner flange in contact with the inner ring of the ballrace in the main gearbox. If you install a driven tail rotor for auto-rotation, a second disc is fitted at the underside of the gearbox, to prevent friction of the rotating parts against the outer ring of the ballrace....

Référence: 907/49

Douille 3,1 x 8 x 10 mm

Pack of 2

Référence: 830/56

Mechanics spacer

Mechanics spacer al., front. Content of the package: 1 piece.

Référence: 641/54

Bearing support 19 mm

Not available

Référence: 64/69

Washer for crankshaft screw

 Content of the package1 piece

Référence: 53/20

Dome fittings set Alouette II PHT2

Swashplate + fittings

Référence: 107/43

Balls chrome-plated 2.5 x 4.8 mm

Chrome-plated brass balls are used to screw onto bell cranks or servo arms for connection to the ball-links of pushrods. The chromium plating prevents premature wear of the ball links.Content of the package: 10 pieces.

Référence: 36/40

Reinforced freewheel bell compl.

Provided that you maintain your model helicopter conscientiously and set it up according to the instructions, the model's flying load limits are well outside its normal flight envelope.Detail features of the kit are designed to suit normal applications, but different parts can be retro-fitted at any time, e.g. if you wish to convert a Kobold into a...

Référence: 260/3

Tail rotor holder

Tail rotor holder XLV.