Sky Fox rotor head

Référence: 1005/49

Tête rotor pour Bell 230 ou AIRWOLFOrd.No. 1005/49

This rotor head is specially designed for the use with an AIRWOLF or a Bell 230.Rotor shaft 12 mm, rotor disc 2360 mmOrd.No. 1005/52 is for a Ø 15 mm rotor shaft and Ord.No. 1005/49 for a Ø 12 mm rotor shaft

Référence: 722/72

Tête de rotor VR-22

The loading of every component of this rotor system is designed to take a multiple of the actual forces. We are looking here at purely safety reserves and under no cirumstances should they be used for experimental purposes.Because of the special requirements of materials used in the rotor head, we expressly recommend that only genuine VARIO spare parts...

Référence: 1005/59

Rotorkopf für TurbineOrd.No. 1005/59

Référence: 704/35

Tête rotor quadripales, 10 mm

Pour axe rotor 10 mmFixation de pale 1 trou14 mm GripØ5 mm vis de pieds de pale

Référence: 702/70

Tête de rotor semi-maquette

This semi-scale rotor head includes additional mixing of the blade holder actuator linkage at a ratio of 2 : 1. This results in well-balanced flying characteristics, and the model has a damped rather than direct response to your control inputs (resembling a 2-blade head with flybar).Use only the suggested rotor blades for flybar-less rotor heads,...

Référence: 703/43

Tête de rotor 3-pales pour axe de rotor Ø 12 mm, à partir 20 kg

Pour répondre aux exigences des poids de décollage de plus en plus importantes, et afin de les optimiser, nous avons équipé la tête de rotor XL-C et la tête de rotor 3-pales pour la grande...

Référence: 703/39

Scale rotor head for Vario Lama

Lama Scale Rotorhead: for the large Vario LamaWe have now finalized our tests with the Starwood Lama scale rotorhead on the Vario Lama 1:4. Now we are proud to present to you under the Ord.No. 703/39, a truly Scale rotor head including all necessary parts in order to mount this head on the Vario Lama.The head is available now. The kit includes the...

Référence: 704/38

Tête 4-pales 12 mm

4-blade rotor head 12 mm for 18 mm

Référence: 703/35

Tête rotor tripales, 10 mm

Not available

Référence: 703/480

tête de rotor pour Chinook

 For use on Ord. No. 4800 only !! Other rotorheads cannot be used on this model.Two rotor heads are required for Ord.No. 4800.

Référence: 702/60

Tête CSS bipales 10 mm / ø5 mm

CSS stands for Cyclic Speed System at this rotor head because the cyclic control occurs more spontaneous.As, for example, a Jet Ranger or an AIRWOLF requires a true-scale look in the air, a rotor head without a flybar is part of the scale detail for these helicopters. Because of its exact reactions in flight we recommend this CSS rotor head.Only the...

Référence: 1005/52

Tête rotor à 2500 mmOrd.No. 1005/52

Ord.No. 1005/52 is for a Ø 15 mm rotor shaft and Ord.No. 1005/49 for Ø 12 mm rotor shaft

Référence: 703/30

Tête 3-pales 10 mm

Des têtes de rotor avec trois ou plusieurs pales constituent un chapitre à part dans le domaine de l'hélicoptère modèle réduit. Nombreux pilotes ressentent l'envie de piloter un jour une...

Référence: 1005/12

Tête rotor pour Bell 212Ord.No. 1005/12

The basic method of operation of the turbine-powered Bell 212's rotor head is the same as that of the Bell 47 G III rotor head. The main difference is that the components have been modified to match the appearance of the Bell 212, and are therefore of different design. For example, a separate swashplate driver is not required, as it is integrated into the...

Référence: 703/94

Tête de rotor maquette pour Alouette 2

This rotor head will please all the scale fanatics amongst you. It is aimed for use with all mechanical versions of the Vario Alouette II, no matter if it is the Benzin version or for electric, methanol or for PHT2. This aluminium beauty is satisfying all the aesthetic requirements and will definitively make your Alouette II look nicer. Vario’s main point...

Référence: 268/72

Tête de rotor 3-pales pour axe de rotor 15 mm

3-blade rotor head for 15 mm Ø rotor shaft.