Albero esagonale 150 mm

Reference: 871/35

Blind hub, driven tail rotor R.H.

 Content of the package1 piece

Reference: 64/39

Silicone cable

Silicone cableapprox. 1.5 msuitable for any starter and can also be used as a battery charger lead for electric flight.

Reference: 1024/25

O-Ring 18 mm für VergaserhalsOrd.No. 1024/25

Reference: 64/50

Starter extension, 150 mm shaft

The starter system with 10 mm freewheel and hexagon shaft has proved excellent in practice. If you own this system and wish to use it to start engines with a propeller fitted, or use it on a fan with its outer cone, you can convert the starter system very easily.

Reference: 64/4

Propeller driver

 Content of the package1 piece

Reference: 28/11

Silicone cable for glowplug lead

Silicon cable for glow plug connector; it's highly flexible, exellent suited for use as glow plug connetor cable. Content: approx. 1 m

Reference: 16/1

Heat-resistant matt black spray paint

This heat-resistant matt black spray paint is suitable for use on silencers, exhaust manifolds and turbine exhaust pipes. The paint is temperature-resistant to 600° C; even more importantly: it...

Reference: 115/13

Flex hose 12 x 100 mm

 Content of the package1 piece

Reference: 67/43

Starter adaptor for 1/4" crankshaft

Because a fan for radial fan housing is "missing" the cone to attach the starter you use a starter adaptor whose nut provides an appropriate internal thread for the crankshaft.Starter adaptorfor 1/4" -28 UNF crankshaft threade.g. at O.S. engines

Reference: 16/2

Silencer paint, black

Silencers and tuned pipes become discoloured and un-sightly during the course of their hard life, but they can be revived with this special heat-resistant paint.The silencer paint also is designed to improve heat dissipation. Heat resistant up to 500° C.150 ml spray can

Reference: 116/97

Flex hose 120 mm dia 20 mm

 Content of the package1 piece

Reference: 25/9

Heat reflective mat

Between fuselage and exhaust tube a heat-reflecting mat avoids melting of the fibreglass. Even in smaller fuselages where conventional silencer systems are close to the inside surface, the heat reflective mat is useful as a heat shield.Heat reflective matheat rejectingsize approx. 300 x 700 mmmat thickness approx. 3 mm

Reference: 871/45

Bush set X-Treme mechanics

 Content of the package1 x 4,0 mm4 x 16,8 mm4 x 30,2 mm4 x 31,2 mm

Reference: 7/68

Startadapter, GFK

Reference: 802/48

Motor-Spezialmutter

Reference: 870/45

Bush set X-Treme mechanics LH

 Content of the package4 x 16.8 mm4 x 27.9 mm4 x 33.5 mm