Home
Marchi

Nessuna marca

Fornitori
Migliori vendite
Flanged ballrace 6 x 10 x 3 mm Anteprima

Riferimento: 92/91

Flanged ballrace 6 x 10 x 3 mm

Recensioni: 0

Ballraces are used wherever moving parts are required to run with a minimum of play and a minimum of friction. The more ballraces are used, the more smoothly the mechanics of a helicopter works, and the lower the rate of wear. The dimensions of a ballrace mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness. For flanged bearings the same...

Prezzo 14,70 €
Più
In vendita su richiesta
Aste 3,0 x 75 mm Anteprima

Riferimento: 70/76

Aste 3,0 x 75 mm

Recensioni: 0

Ready-made pushrod, threaded M 3. Content of the package: 1 piece

Prezzo 6,30 €
Più
In vendita su richiesta
Tutte le migliori vendite

Tubo in PTFE 20 x 2,5 x 100 mm

115/11
Valutazione 



Manifolds and tuned pipes or silencers must be installed without touching each other, because the contact of these metal parts could cause radio interference. We can refer to this interference as "electric noise".
The connection by PTFE pipe enables the required distance of 10 - 15 mm in the prescribed position, and it steadily seals gas-tight. This extremely heat-resistant material, with 2.5 mm wall thickness and 20 mm I.D. will last a full season if handled carefully.

  • PTFE pipe
  • approx. 20 mm I.D.
  • approx. 25 mm A.D.
  • 100 mm long
19,40 €
Tasse incluse
Quantità
In vendita su richiesta

 

Política de seguridad

 

Política de envío

 

Política de devolución

Descrizione



Manifolds and tuned pipes or silencers must be installed without touching each other, because the contact of these metal parts could cause radio interference. We can refer to this interference as "electric noise".
The connection by PTFE pipe enables the required distance of 10 - 15 mm in the prescribed position, and it steadily seals gas-tight. This extremely heat-resistant material, with 2.5 mm wall thickness and 20 mm I.D. will last a full season if handled carefully.

  • PTFE pipe
  • approx. 20 mm I.D.
  • approx. 25 mm A.D.
  • 100 mm long
Dettagli del prodotto
115/11
Recensioni

Ancora nessuna recensione da parte degli utenti.

Scrivi la tua recensione

Tubo in PTFE 20 x 2,5 x 100 mm

Tubo in PTFE 20 x 2,5 x 100 mm



Manifolds and tuned pipes or silencers must be installed without touching each other, because the contact of these metal parts could cause radio interference. We can refer to this interference as "electric noise".
The connection by PTFE pipe enables the required distance of 10 - 15 mm in the prescribed position, and it steadily seals gas-tight. This extremely heat-resistant material, with 2.5 mm wall thickness and 20 mm I.D. will last a full season if handled carefully.

  • PTFE pipe
  • approx. 20 mm I.D.
  • approx. 25 mm A.D.
  • 100 mm long
Scrivi la tua recensione
16 autres produits dans la même catégorie :
Heat reflective mat Aperçu rapide

Référence: 25/9

Heat reflective mat

Commentaire(s): 0

Between fuselage and exhaust tube a heat-reflecting mat avoids melting of the fibreglass. Even in smaller fuselages where conventional silencer systems are close to the inside surface, the heat reflective mat is useful as a heat shield.Heat reflective matheat rejectingsize approx. 300 x 700 mmmat thickness approx. 3 mm

Prix 37,30 €
Détails
En vente sur demande
Rallonge de démarrage, tige... Aperçu rapide

Référence: 64/50

Rallonge de démarrage, tige 150 mm

Commentaire(s): 0

The starter system with 10 mm freewheel and hexagon shaft has proved excellent in practice. If you own this system and wish to use it to start engines with a propeller fitted, or use it on a fan with its outer cone, you can convert the starter system very easily.

Prix 136,20 €
Détails
En vente sur demande
Cordon silicone pour bougie Aperçu rapide

Référence: 28/11

Cordon silicone pour bougie

Commentaire(s): 0

Silicon cable for glow plug connector; it's highly flexible, exellent suited for use as glow plug connetor cable. Content: approx. 1 m

Prix 6,60 €
Détails
En vente sur demande
Tube PTFE 20 x 2,5 x 120 mm Aperçu rapide

Référence: 115/5

Tube PTFE 20 x 2,5 x 120 mm

Commentaire(s): 0

Manifolds and tuned pipes or silencers must be installed without touching each other, because the contact of these metal parts could cause radio interference. We can refer to this interference as "electric noise". The connection by PTFE pipe enables the required distance of 10 - 15 mm in the prescribed position, and it steadily seals gas-tight. This...

Prix 19,40 €
Détails
En vente sur demande

Seguici su Facebook

Facebook