Ninguna marca
Referencia: 92/91
Brida rodamientos autolubricantes 6 x 10 x 3 mm
Política de seguridad
Política de envío
Política de devolución
No hay reseñas de clientes en este momento.
Riferimento: 72/10
Rotor head centre piece for 2-bladed rotor head.
Riferimento: 80/20
Control bridge 2-part metal, for 4 mm Ø flybar.
Riferimento: 80/10
The control bridge actuates the flybar. The servos pass the control commands to the swashplate. The collective pitch compensator connected to the swashplate transfers the movement to the control bridge via the angled pushrods. The flybar accepts the control commands and passes them on to the blade holders and the rotor disc.Control bridge, GRP, for 4 mm ∅...
Riferimento: 74/7
Flybarless electronics have now become common. Where they are being used harder damping is required.For these cases Vario is now offering a harder damping of the blade shaft provided by a pretension absorbing element in the centre block.For the adjustment, the outer O-ring position can be selected between "hard" and "soft" flight characteristics.Important...
Riferimento: 10/81
Silicone sleeve5 x 7 x 100 mmtransparent
Riferimento: 76/18
Component part for a multi-blade rotor head for 10 mm or 12 mm Ø main shaft.
Riferimento: 71/30
Pitch compensator, complete, for 10 mm ∅ main shaft, centre piece aluminium
Riferimento: 87/21
Washer for actuator arm Content of the package: 2 pieces
Riferimento: 76/19
As demands on helicopters continue to rise, so stronger blade holders are required. In this case a 14 mm blade holder is combined with a 5 mm Ø hole for blade retention, i.e. the matching blade holder screws and self-locking nuts are M5 in size.GRP blade holder with short linkage armfor multi-blade rotor heads
Riferimento: 91/50
Paddles1 pairapprox. 29 g eachfor ∅ 4 mm / 5 mm flybar
