Puntone per motore

Riferimento: 809/12

M 4 Verschraubung

Riferimento: 260/15

Scivolo a slittamento

Skid strut 8 x 450 mm silver

Riferimento: 890/5

Kufenauflage

Riferimento: 870/7

Heckrohrhalter, Alu

Riferimento: 800/24

Stabilizzatore grande

If you fit a large stabiliser to your trainer there is no need for a tail skid. This stabiliser provides the tail rotor blades with enough ground clearance, and offers good flight stability at low airspeeds. There are two versions with different methods of attachment.height 275 mm118 g total weightwith clamp for 20 mm Ø tail booms

Riferimento: 7/6

Dado della trasmissione del tubo M 3

 Content of the package4 pieces

Riferimento: 809/7

Heckrohrhalter 20 mm

Riferimento: 860/11

Heckrohrhalter, 2fach kugelgelagert

Riferimento: 800/20

Coda slitta rossa

Tail skids only. Create your own individual colour scheme: e.g. white stabiliser - red skid!

Riferimento: 800/36

Tappo di gomma di 14 mm, pin 5x6mm

Rubber plug 14 mmCone 5 x 6 mmContent of the package 6 pieces

Riferimento: 800/52

Stabilizza il set

 Aluminium Stabiliser set largefor trainer models like BENZIN Acrobatic

Riferimento: 24/7

Conducto de aire de enfriamiento para foxy

Riferimento: 800/23

Morsetto per stabilizzatore orizzontale 800/25

Component part for stabiliser set, Ord.No. 800/25

Riferimento: 870/8

Winkel für Kreisel

Riferimento: 310/8

Supporto per tubi sintonizzato in 2 parti

GRP tuned pipe holders are used to secure the tuned pipe to the tail booms. They are easy to clamp in place. The tail pipe of the tuned pipe should be covered with silicone hose (Order No. 116/8), or with one of the tail pipes (Ord.No. 116/0 or 116/9), so that the heat of the pipe does not damage the holder.Tuned pipe holder, 2-partfor 20 mm ��tail boom

Riferimento: 722/39

Supporto per il motore

Support for motor