Tanque 540 ml para X-Perience

Reference: 13/32

Kerosene refuelling system

The kerosene refuelling system is sealed with a rubber nipple. The constant low pressure inside the tank draws the nipple firmly against the refuelling opening. That is also the reason why a mechanism such as a spring-controlled valve is not suitable, because the low pressure tends to push the spring back as spring tension diminishes.

Reference: 26/2

Rubber cap

Rubber cap useful to seal fuel lines on the pit box or fuel tank nipples pack of 4

Reference: 26

Tank 500 ccm Benzin/Methanol

Reference: 26/100

Benzin kit incl. fuel tank 540 ccm

Not available

Reference: 10/83

Tubing clamp

Content of the package: 4 pieces

Reference: 26/7

Tank for kerosene 2.5 l

Tank for kerosene 2500 mlDimensions of bottle: 28.5 x 12 x 8 cm

Reference: 26/32

Schlauchsicherung für Methanol

Reference: 26/50

Kevlartank for Kerosene 1.4 l

Aramid is a fibre that is used in motor racing. The tanks have an even surface inside and rough on the outside. These fuel tanks are all pressure tested to make sure that they are 100% leak-proof when they arrive at your workshop. They fit in every fuselage, that would normally use the plastic tank Ord.No. 26/5 for. For example, this Aramid tank is...

Reference: 26/13

Fuel tank clunk big

Not available

Reference: 7/26

Tankflasche mit Zubehör

Reference: 791/27

Internal fueltank for Cobra, 2.2 l.

The internal fueltank for our model of the Cobra enables the builder to produce a military version of the machine.The capacity of 2.2 l. gives flight times of around 12 - 14 minutes.

Reference: 26/34

Petrol / kerosene hose clamp

Fuel tubing is required to withstand many kinds of thermal and chemical stress, i.e. it has to be resistant to petrol and kerosene whilst maintaining maximum flexibility. However, it must also be possible to fix the tubing reliably to tubes and nipples; the more valuable the model, the more important it becomes to fix the fuel tubing with absolute...

Reference: 26/10

Zusatztank, ca. 68 ccm für Methanol

Reference: 13/27

Carenado de la válvula de llenado

Reference: 13/28

Tanknippel für Benzin/Kerosin/Methanol

Reference: 10/82

Schlauch für Methanol 1 m