Accueil

Filtrer par

Prix

Prix

  • 6,00 € - 131,00 €

Catégories

Catégories

Marques

No brand

Fournisseurs
Meilleures Ventes
Flanged ballrace 6 x 10 x 3 mm Aperçu rapide

Référence: 92/91

Flanged ballrace 6 x 10 x 3 mm

Commentaire(s): 0

Ballraces are used wherever moving parts are required to run with a minimum of play and a minimum of friction. The more ballraces are used, the more smoothly the mechanics of a helicopter works, and the lower the rate of wear. The dimensions of a ballrace mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness. For flanged bearings the same...

Prix 14,70 €
Détails
En vente sur demande
Toutes les meilleures ventes

Il y a 35 produits.

Trier par :
Pertinence Nom, A à Z Nom, Z à A Prix, croissant Prix, décroissant
Affichage 13-24 de 35 article(s)

Filtres actifs

  • Catégories : Clefs
  • Catégories : Clefs à emmancher
  • Catégories : Gabarits
Flexible glow plug socket... Aperçu rapide

Référence: 11/20

Flexible glow plug socket spanner

Commentaire(s): 0

Many a glow plug is buried inaccessibly inside the model. This flexible socket spanner can be curved to allow you to reach the plug, and you can keep the spanner curved while you screw the plug in or out. Fits all standard glow plugs.

Prix 36,50 €
Détails
En vente sur demande
Swashplate jig Aperçu rapide

Référence: 68/4

Swashplate jig

Commentaire(s): 0

The pushrods from the swashplate to the rotor head must be set to identical lengths.Just slip the swashplate jig under the swashplate, and the swashplate will automatically be set parallel to the dome plate and at right-angles to the rotor shaft. You can now set up all your linkages with confidence.

Prix 19,40 €
Détails
En vente sur demande
Flybar spirit level Aperçu rapide

Référence: 79/1

Flybar spirit level

Commentaire(s): 0

To adjust the pitch of the main rotor blades accurately it is essential to set the flybar exactly horizontal. This is done by simply hanging a spirit level from the flybar. But make sure that the helicopter is standing on a level surface before you start!

Prix 17,00 €
Détails
En vente sur demande
Rotor head immobiliser Aperçu rapide

Référence: 79/3

Rotor head immobiliser

Commentaire(s): 0

Working on the pitch adjustment of the main rotor blades requires a few conditions. First of all your helicopter must be standing on a flat level surface; the flybar must be horizontal and remain so throughout the procedure. The smooth running of all components with bearings makes this an almost impossible task because the slightest movement during pitch...

Prix 19,40 €
Détails
En vente sur demande
Rotor blade allen key for... Aperçu rapide

Référence: 33/11

Rotor blade allen key for M5 socket-head screws

Commentaire(s): 0

Rotor blades for large-scale model helicopters must be secured using screws of the appropriate size. Normally M4 bolts are employed, but here the usual size is M5. The T-handle of this M5 allen key provides plenty of torque, but you should only tighten the screws to the point where the blades can still align themselves at start-up.

Prix 11,70 €
Détails
En vente sur demande
Flybar jig Aperçu rapide

Référence: 91/1

Flybar jig

Commentaire(s): 0

A flybar rotor head is controlled indirectly; movements are transmitted first to the flybar and paddles (Hiller control method, using auxiliary rotor head). The Hiller system only works perfectly if the paddles are set exactly parallel to each other. Unevenly set paddles also produce a bending moment on the flybar during every rotation which leads to more...

Prix 27,40 €
Détails
En vente sur demande
Retour en haut

Suivez-nous sur Facebook

Facebook