Marques

No brand

Référence: 97/4

Servo linkage set

Commentaire(s): 0

When you build your first model helicopter you will find all the linkage components required to connect the servos to the mechanics supplied with the RC set (German radio systems only). When you come to installing servos in other models you can use this servo linkage set which contains all the link balls, screws, nuts and screw-fitting pushrod...

Prix 40,10 €
Détails
En vente sur demande
Toutes les meilleures ventes

Actuating lever

87/20
Note 



The connection between mixer lever and variable rocker is carried out by an actuating lever, triple ballraced.

Content of the package: 2 pieces

23,80 €
Quantité
En vente sur demande

 

Política de seguridad

 

Política de envío

 

Política de devolución

Description



The connection between mixer lever and variable rocker is carried out by an actuating lever, triple ballraced.

Content of the package: 2 pieces

Détails du produit
87/20
Avis

Aucun avis n'a été publié pour le moment.

Donnez votre avis

Actuating lever

Actuating lever



The connection between mixer lever and variable rocker is carried out by an actuating lever, triple ballraced.

Content of the package: 2 pieces

Donnez votre avis
16 altri prodotti della stessa categoria:

Riferimento: 74/21

O-ring 3.5 x 12 mm hard

Recensioni: 0

O-ring 3.5 x 12 mm hard Content of the package: 8 pieces Tip: O-rings always slide with a drop of silicone oil onto the shaft.

Prezzo 23,80 €
Più
In vendita su richiesta

Riferimento: 79/21

Flybar stainless steel 4 x 320 mm

Recensioni: 0

The length of the flybar itself also plays an important role in the model's flight characteristics: the longer the flybar, the smoother the hover. A longer flybar increases the control deflections. 450 mm length is considered normal, while 510 mm provides more docile handling.

Prezzo 14,80 €
Più
In vendita su richiesta

Riferimento: 78/40

Set leva miscelatore

Recensioni: 0

Mixer levers are an essential part of every flybar-controlled rotor head. From the swashplate a pushrod runs to the ballraced mixer arm which is screwed to the blade holder arm. The mixer levers transmit the control movement to the flybar via the double ball-link.Additionial accessories for the use of mixer levers are either two flanged ballraces or two...

Prezzo 32,60 €
Più
In vendita su richiesta

Riferimento: 702/76

GRP blade holder, 22 mm blade throat

Recensioni: 0

This blade holder was specially developed for the large Bell 47 G III with a rotor diameter of 2.36 m. It has a 22 mm blade throat and a 6 mm Ø bore for the retaining screw, i.e. the matching blade holder screws and self-locking nuts are M6 in size.

Prezzo 32,90 €
Più
In vendita su richiesta

Riferimento: 82/9

Aluminium rocker

Recensioni: 0

When you use a speed regulator you put the magnets into the cut-outs of this clamp ring. Clamp ring for speed collection, 10 mm Ø.

Prezzo 19,90 €
Più
In vendita su richiesta

Riferimento: 54/16

Clamp ring pitch compensator 17 mm

Recensioni: 0

The 17 mm Ø clamp ring is fitted to the rotor head centre piece, the steel pin slides in the guide slot of the pitch compensator. Rotate the clamp for fine adjustment so that your helicopter flies straight when you apply a pitch-axis command.Clamp ring for pitch compensator 17 mm Ø, length of the pin 30 mm.

Prezzo 23,80 €
Più
In vendita su richiesta

Riferimento: 79/10

Asta stabilizzatore 4 x 510 mm

Recensioni: 0

The length of the flybar itself also plays an important role in the model's flight characteristics: the longer the flybar, the smoother the hover. A longer flybar increases the control deflections. 450 mm length is considered normal, while 510 mm provides more docile handling.

Prezzo 16,90 €
Più
In vendita su richiesta