Domplatte, Alu

Riferimento: 802/24

Kühlluftschacht Boxer

Riferimento: 870/41

Untere Edelstahl-Träger 8 mm

Riferimento: 870/16

Leitwerkadapter, 2-teilig

Riferimento: 809/6

RC-Vorbau Sky Fox

Riferimento: 800/24

Stabilizzatore grande

If you fit a large stabiliser to your trainer there is no need for a tail skid. This stabiliser provides the tail rotor blades with enough ground clearance, and offers good flight stability at low airspeeds. There are two versions with different methods of attachment.height 275 mm118 g total weightwith clamp for 20 mm Ø tail booms

Riferimento: 860/120

Toothed belt for X-Perience, 3M/606

Toothed belt for X-Perience. Content of the package: 1 piece.

Riferimento: 830/10

Streben für Benzin-Trainer

Riferimento: 809/12

M 4 Verschraubung

Riferimento: 310/8

Supporto per tubi sintonizzato in 2 parti

GRP tuned pipe holders are used to secure the tuned pipe to the tail booms. They are easy to clamp in place. The tail pipe of the tuned pipe should be covered with silicone hose (Order No. 116/8), or with one of the tail pipes (Ord.No. 116/0 or 116/9), so that the heat of the pipe does not damage the holder.Tuned pipe holder, 2-partfor 20 mm ��tail boom

Riferimento: 800/37

Supporto per tettuccio da 26 mm

The required length of the canopy holder is determined by the kind of canopy and the location of its fitting points on the side frames.

Riferimento: 870/105

Toothed belt, pitch T5/340

Toothed belt, pitch 5for X-Treme trainer helicoptersWhen replacing a toothed belt please note that different toothed belts are used in X-Treme mechanics and X-Treme trainer helicopters.

Riferimento: 860/31

Strebenanschluß-Hülse

Riferimento: 260/15

Scivolo a slittamento

Skid strut 8 x 450 mm silver

Riferimento: 800/25

Stabilizzatore grande

If you fit a large stabiliser to your trainer there is no need for a tail skid. This stabiliser provides the tail rotor blades with enough ground clearance, and offers good flight stability at low airspeeds. There are two versions with different methods of attachment.275 mm high118 g total weightscrew fitting to tail rotor holder

Riferimento: 802/17

Supporto montante 25 mm

  Content of the package 1 piece

Riferimento: 107/27

Uniball angolati

 Ball-linkcurvedpack of 6