Marques

No brand

Référence: 97/4

Servo linkage set

Commentaire(s): 0

When you build your first model helicopter you will find all the linkage components required to connect the servos to the mechanics supplied with the RC set (German radio systems only). When you come to installing servos in other models you can use this servo linkage set which contains all the link balls, screws, nuts and screw-fitting pushrod...

Prix 40,10 €
Détails
En vente sur demande
Toutes les meilleures ventes

Bell 205 UH-1D 1:6 - Fuselage kit

2060.e
Note 

The "big Bell UH-1D" from VARIO is a 1050 size scale helicopter. You can power this remote-controlled model helicopter with turbine or electric propulsion. Bell Helicopter is the creator of the...

Motorisation
1 377,30 €
Quantité
En stock

 

Política de seguridad

 

Política de envío

 

Política de devolución

Description

The "big Bell UH-1D" from VARIO is a 1050 size scale helicopter. You can power this remote-controlled model helicopter with turbine or electric propulsion. Bell Helicopter is the creator of the man-carrying version.An opening hatch can be installed in the scale position in the extreme nose of the fuselage, and this can be used to conceal facilities such as switches. The accessories for installing the hatch are included in the door fittings set. The tail boom is attached by a central screw-fitting joint; all you have to do is disconnect the tail rotor servo and undo the joint to remove the boom. The mechanical system is supported on a sub-structure consisting of aluminium plates with plastic connecting pieces, which in turn is screwed to the skid landing gear. The 3-litre kerosene tank is located on the bottom of the fuselage below the entry step. The position of the turbine aft of the rotor shaft inevitably requires nose weight for the correct Centre of Gravity, and this means that it is possible to install extensive scale fittings in the cockpit, including pilots, safety belts, landing searchlights etc. We decided on a rotor disc diameter of 2300 mm in order to ensure that this helicopter has good auto-rotation characteristics as well as very high performance. With an all-up weight of 15 - 16 kg.For VARIO's 1050 Huey we recommend a maximum main rotor speed of 853 rpm. Electric drive sets from VARIO are already tuned to this head speed.Select one of the following drive types:Turbine Mechanics 1002/68left hand rotation (true to scale)For turbine Jakadofsky Pro 5000, clutch bell 2 blade: t. 27The UH fuselage kit for the Pro 5000 turbine can be ordered with Ord.No. 2060.The turbine version fascinates by the smell of kerosene, a gently starting rotor, accompanied by the unmistakable sound of a turbine. Until the electrical power revolution in radio controlled model construction, turbines were the most powerful drives. In terms of flight times, turbines are still superior to electro-flight.Turbine Mechanics JetCat PHT3-3 (mechanics and turbine)left hand rotation (true to scale)gear ratio: 110.25:1turbine speed: 94,000 rpmrotor speed: 853 rpmIncluding main rotor shaftThe Bell UH 1 fuselage kit for JetCat PHT3-3 can be ordered with Ord.No. 2060.The turbine version fascinates by the smell of kerosene, a gently starting rotor, accompanied by the unmistakable sound of a turbine. Until the electrical power revolution in radio controlled model construction, turbines were the most powerful drives. In terms of flight times, turbines are still superior to electro-flight.Electric Mechanics 1002/78Our propulsion recommendation for this helicopter! Contemporary mechanics, especially designed for the scale model electric flight. The mounting points in the fuselage are identical to those of the turbine mechanics Ord.No. 1002/68 and 1002/69. Therefore, the mechanics can be used in almost all kits that also fit these VARIO turbine mechanics with upper turbine position (in this case Ord.No. 2060). Electric motors are quiet, low in vibration, without exhaust gases and residual thrust. The blade slap noise sound of the rotor blades is more noticeable than with other types of propulsion and the result is a true-to-life impression in flight. For this electromechanical system we offer a drive set for 12S LiPos.

Détails du produit
2060.e

Fiche technique

Échelle
1:6
Longueur
2180 mm
Le poids
E: ca. 15,5 kg, T: ca. 16 kg
Largeur
620 mm
Hauteur
405 mm
Diamètre du rotor
2360 mm
Documents joints
Téléchargement
Avis

Aucun avis n'a été publié pour le moment.

Donnez votre avis

Servo linkage set

Servo linkage set



When you build your first model helicopter you will find all the linkage components required to connect the servos to the mechanics supplied with the RC set (German radio systems only).
When you come to installing servos in other models you can use this servo linkage set which contains all the link balls, screws, nuts and screw-fitting pushrod connectors.
Servo linkage set, 18-part

Donnez votre avis
Vous aimerez aussi

Référence: 1005/12

Tête rotor pour Bell 212Ord.No. 1005/12

Commentaire(s): 0

The basic method of operation of the turbine-powered Bell 212's rotor head is the same as that of the Bell 47 G III rotor head. The main difference is that the components have been modified to match the appearance of the Bell 212, and are therefore of different design. For example, a separate swashplate driver is not required, as it is integrated into the...

Prix 596,30 €
Détails
En vente sur demande

Référence: 413

2-blade-set 2360 mm

Commentaire(s): 0

Specification 2-blade-set length: 1050 mm rotor disc: 2360 mm blade root: 22 mm 1-hole blade chord: 75 mm profile thickness: 11 mm weight: ca. 450 g material: CFRP Shark Skin finish: anthracite matt symmetry: reflex l.h.r.

Prix 331,20 €
Détails
En vente sur demande

Référence: 34/32

Tail rotor blades 156 mm, grey

Commentaire(s): 0

Tail rotor blade, rotor disc 390 mm ØSpecification 8.0 mm blade root16.5 g approx.45.5 mm blade chordGRP6.7 mm profile thicknesssymmetrical156 mm longbalanced1 pairThe tail rotor blades are designed exclusively for use with the specified VARIO mechanics in conjunction with the tail rotor 1003/80. The maximum rotational speed of the tail rotor shaft is...

Prix 86,90 €
Détails
En vente sur demande
16 autres produits dans la même catégorie :

Référence: 7900.e

AH-15 Cobra 1:7 - Fuselage kit

Commentaire(s): 0

The Cobra from VARIO is a 800 size scale helicopter. You can power this remote-controlled model helicopter with gasoline (benzin), turbine or electric propulsion. Bell Helicopter is the creator of...

Prix 987,80 €
Détails
En stock

Référence: 2120.e

Bell 212 1:7 - Fuselage kit

Commentaire(s): 0

The "small Bell 212" from VARIO is a 800 size scale helicopter. You can power this remote-controlled model helicopter with gasoline (benzin), turbine or electric propulsion. Bell Helicopter is the creator of the man-carrying version. For VARIO's 800 Bell 212 we recommend a maximum main rotor speed of 1270 rpm (B, E), bzw. 1350 rpm (T). Electric drive...

Prix 805,50 €
Détails
En stock

Référence: 2340.e

Bell 230 1:5 - Fuselage kit

Commentaire(s): 0

The "big Bell 230" from VARIO is a 1050 size scale helicopter. You can power this remote-controlled model helicopter with turbine or electric propulsion. Bell Helicopter is the creator of the man-carrying version. The model incorporates GRP technology which substantially shortens the required building time. The 2.5 l fueltank - itself a GRP moulding -...

Prix 2 313,00 €
Détails
En stock

Référence: 1004.e

JetRanger big 1:6 - Fuselage kit

Commentaire(s): 0

The "Big JetRanger" from VARIO is a 800 size scale helicopter. You can power this remote-controlled model helicopter with gasoline (benzin) or electric propulsion. Bell Helicopter is the creator of the man-carrying version and produces this helicopter. For VARIO's 800 JetRanger we recommend a maximum main rotor speed of 1270 rpm. Electric drive sets...

Prix 650,00 €
Détails
En vente sur demande

Référence: 4340.e

Bell 430 1:5 - Fuselage kit

Commentaire(s): 0

The "big Bell 430" from VARIO is a 1050 size scale helicopter. You can power this remote-controlled model helicopter with turbine or electric propulsion. Bell Helicopter is the creator of the man-carrying version. The model incorporates GRP technology which substantially shortens the required building time. The 2.5 l fueltank - itself a GRP moulding -...

Prix 2 313,00 €
Détails
En stock

Référence: 4700.e

Bell 47 G III 1:4 - Fuselage kit

Commentaire(s): 0

The Bell 47 G III from VARIO is a 1050 size scale helicopter. You can power this remote-controlled model helicopter with gasoline (benzin) or electric propulsion. Bell Aircraft Corporation is the creator of the man-carrying version. For VARIO's 1050 Bell 47 G 3 we recommend a main rotor speed of approx. 900 rpm. Electric drive sets from VARIO are...

Prix 1 744,20 €
Détails
En stock

Référence: 9004.t

Hughes 500E 1:5 - Fuselage kit

Commentaire(s): 0

The "big Hughes 500E" from VARIO is a 850 size scale helicopter. You can power this remote-controlled model helicopter with gasoline (benzin), turbine or electric propulsion. Hughes Helicopters is the creator of the man-carrying version and the Boeing daughter McDonnell Douglas produces this helicopter. For VARIO's 850 Hughes 500E we recommend a maximum...

Prix 964,70 €
Détails
En vente sur demande

Référence: 6032.e

Schweizer 300C 1:4 - Fuselage kit

Commentaire(s): 0

The "big Schweizer 300C" from VARIO is a 1000 size scale helicopter. You can power this remote-controlled model helicopter with gasoline (benzin) or electric propulsion. Hughes Helicopters is the creator of the man-carrying version and later licensed Schweizer Aircraft Corporation. The helicopter kept its name also after the takeover of Schweizer...

Prix 1 796,50 €
Détails
En vente sur demande

Référence: 6300.e

AH-64 Apache 1:7 - Fuselage kit

Commentaire(s): 0

The AH-64 Apache from VARIO is a 950 size scale helicopter. You can power this remote-controlled model helicopter with electric propulsion. Hughes Aircraft is the creator of the man-carrying...

Prix 2 301,80 €
Détails
En stock

Référence: 9020.e

Agusta AW109 K2 1:6 - Fuselage kit

Commentaire(s): 0

The AW109 from VARIO is a 700 size scale helicopter. You can power this remote-controlled model helicopter with gasoline (benzin) or electric propulsion. Agusta (later Agusta Westland) is the...

Prix 625,60 €
Détails
En stock

Référence: 6030.e

Schweizer 300C 1:5 - Fuselage kit

Commentaire(s): 0

The "small Schweizer 300" from VARIO is a 700, resp. 750 size scale helicopter. You can power this remote-controlled model helicopter with gasoline (benzin) or electric propulsion. Hughes Helicopters is the creator of the man-carrying version and later licensed Schweizer Aircraft Corporation. The helicopter kept its name also after the takeover of...

Prix 799,30 €
Détails
En vente sur demande

Référence: 1100.s

Bell 205 UH-1D 1:8 - Fuselage kit

Commentaire(s): 0

The "small UH-1D" from VARIO is a 750 size scale helicopter. You can power this remote-controlled model helicopter with electric propulsion. Bell Helicopter is the creator of the man-carrying version. Following the full size helicopter the model also has an exceptionally long rotor shaft. In comparison to the Bell 205, the 204 version has a shorter...

Prix 447,40 €
Détails
En stock