Pezón de 90 grados, hilo imperial

Référence: 1006/9

Main gear box with freewheel

If you require a driven tail rotor for auto-rotation, the main gear hub must be fitted with a freewheel; the freewheel on the main rotor shaft then needs to be replaced by a fixed hub mounted on the main rotor shaft.Main gearbox incl. freewheel for driven tail rotor for auto-rotation landings; kit-form. The pinion shaft 41/25 supplied is only suitable for...

Référence: 251/200

Kit for lowering the tail output, X-Treme

When the X-Treme mechanics are mounted in certail fuselage such as Agusta, UH-1D or Dauphin, the tail output needs to be lower. This kit lowers the tail output.

Référence: 44/58

Couronne 52 dents

The combination of 52 : 32 teeth is used for the Sky Fox Boxer model, driven by a 4-stroke boxer motor with 2 x 13.26 cc capacity. 2-stroke glow plug engines (which are fitting our models because of performance and dimensions), don't achieve a satisfying result with this gear ratio.The illustration shows a symbol with the number of teeth of the main gear....

Référence: 4/30

90° Nippel mit Zollgewinde

Référence: 44/10

Couronne 55 dents, seule

Gear 55-tooth GRP The illustration shows a symbol with the number of teeth of the main gear. The number next to the back slash shows the number of teeth for the appropriate clutch and the resulting gear ratio.

Référence: 41/25

Pinion shaft 16.5 mm - for AR

The pinion shaft (shaft and integral spur gear) is one link in the transmission which transfers the engine's power to the main rotor.Pinion shaft with 16.5 mm gear depthsolely for the use with the freewheel bell Ord.No. 36/40or with the hub bell Ord.No. 36/45The length of both pinion shafts is ideal for the optional installation of a driven tail rotor for...

Référence: 870/6

Gyro plate GFK, X-Treme

Not available

Référence: 37/11

Gearbox cover

Gearbox cover for gearbox housing Ord.No. 37/10, alone.

Référence: 44/52

Couronne 52 dents

Gear 52-tooth GRP The illustration shows a symbol with the number of teeth of the main gear. The number next to the back slash shows the number of teeth for the appropriate clutch and the resulting gear ratio.

Référence: 870/2

RC frame, GFK, for X-Treme

Not available

Référence: 870/73

Side plate X-Treme, CFK

Not available

Référence: 4/7

Mechanics mount, X-Treme

Not available

Référence: 809/200

SkyFox side frames with cooling duct

Not available

Référence: 870/51

Rear vertical frame, X-Treme

Not available

Référence: 47/10

Spacer 7 x 13 x 5 mm

Spacer 7 x 13 x 5 mm

Référence: 870/52

longitudinal carrier, GFK

Not available