Accueil
Marques

No brand

Fournisseurs
Meilleures Ventes
Flanged ballrace 6 x 10 x 3 mm Aperçu rapide

Référence: 92/91

Flanged ballrace 6 x 10 x 3 mm

Commentaire(s): 0

Ballraces are used wherever moving parts are required to run with a minimum of play and a minimum of friction. The more ballraces are used, the more smoothly the mechanics of a helicopter works, and the lower the rate of wear. The dimensions of a ballrace mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness. For flanged bearings the same...

Prix 14,70 €
Détails
En vente sur demande
Toutes les meilleures ventes

Rotor brake, GRP

72/5
Note 



When you have landed and stopped the engine, the rotor head continues spinning for quite some time until it stops by itself. A rotor brake shortens the time you have to wait. Using light pressure with the flat of your hand on the domed face of the rotor brake you can stop the rotor in a few moments.
Please note: stay in safe distance away from the turning circles of main rotor and tail rotor, and this applies to loose clothing as well!

Rotor brake, GRP, for rounded or flat rockers.

14,70 €
TTC
Quantité
En vente sur demande

 

Política de seguridad

 

Política de envío

 

Política de devolución

Description



When you have landed and stopped the engine, the rotor head continues spinning for quite some time until it stops by itself. A rotor brake shortens the time you have to wait. Using light pressure with the flat of your hand on the domed face of the rotor brake you can stop the rotor in a few moments.
Please note: stay in safe distance away from the turning circles of main rotor and tail rotor, and this applies to loose clothing as well!

Rotor brake, GRP, for rounded or flat rockers.

Détails du produit
72/5
Avis

Aucun avis n'a été publié pour le moment.

Donnez votre avis

Rotor brake, GRP

Rotor brake, GRP



When you have landed and stopped the engine, the rotor head continues spinning for quite some time until it stops by itself. A rotor brake shortens the time you have to wait. Using light pressure with the flat of your hand on the domed face of the rotor brake you can stop the rotor in a few moments.
Please note: stay in safe distance away from the turning circles of main rotor and tail rotor, and this applies to loose clothing as well!

Rotor brake, GRP, for rounded or flat rockers.

Donnez votre avis
16 autres produits dans la même catégorie :
90 degree link Aperçu rapide

Référence: 832/87

90 degree link

Commentaire(s): 0

A 90° twisted double ball-link connect the mixer lever to the ball collet on the flybar, suitable for the rotor head 722/72.Content of the package: 2 pieces

Prix 17,00 €
Détails
En vente sur demande
Rotor head cover for... Aperçu rapide

Référence: 707/5

Rotor head cover for 5-blade head

Commentaire(s): 0

The multi-blade rotor heads of full-size helicopters are generally fitted with protective covers; this applies to the Ecureuil, the Dauphin, the Eurocopter EC 135 and 145, the MD Hughes, etc. Rotor head covers also look good on your model, and we stock them with indentations corresponding to the number of blade grips. The covers are made of CFRP and can...

Prix 75,30 €
Détails
En vente sur demande
Rotor head dampers for 2... Aperçu rapide

Référence: 74/7

Rotor head dampers for 2 blade FBL systems

Commentaire(s): 0

Flybarless electronics have now become common. Where they are being used harder damping is required.For these cases Vario is now offering a harder damping of the blade shaft provided by a pretension absorbing element in the centre block.For the adjustment, the outer O-ring position can be selected between "hard" and "soft" flight characteristics.Important...

Prix 30,60 €
Détails
En vente sur demande
Ball collet 4 mm Aperçu rapide

Référence: 86

Ball collet 4 mm

Commentaire(s): 0

Ball collets provide the fixation of double ball-links on the flybar, in order to settle the essential distance to the rocker. Ball collet 4 mm Ø, pack of 2, chrome-plated.

Prix 19,40 €
Détails
En vente sur demande
Ball-collet with double ball Aperçu rapide

Référence: 832/66

Ball-collet with double ball

Commentaire(s): 0

The use of ball-collets makes it possible to attach double ball-links to the flybar; this automatically sets the correct rocker spacing. The double-ball on these ball-collets also provides an adjustment facility for the VR-22 rotor head, as the double ball-link can always be set vertical by connecting it to the inside or outside ball - provided that the...

Prix 37,50 €
Détails
En vente sur demande
Thrust bearing set complete Aperçu rapide

Référence: 117/20

Thrust bearing set complete

Commentaire(s): 0

The standard version of our mechanics includes ground thrust bearing shafts with a of 8 mm Ø and a length of 110 mm.Thrust bearings absorb the high centrifugal forces exerted by the main rotor blades. The effect of the axial bearings is retained in full when the blade holders rotate.Thrust bearing set, complete as shown.

Prix 54,60 €
Détails
En vente sur demande
Barre de Bell inox 5 x 600 mm Aperçu rapide

Référence: 79/30

Barre de Bell inox 5 x 600 mm

Commentaire(s): 0

The length of the flybar itself also plays an important role in the model's flight characteristics: the longer the flybar, the smoother the hover. A longer flybar increases the control deflections. 450 mm length is considered normal, while 510 mm provides more docile handling.

Prix 25,10 €
Détails
En vente sur demande
Clamp ring pitch... Aperçu rapide

Référence: 54/16

Clamp ring pitch compensator 17 mm

Commentaire(s): 0

The 17 mm Ø clamp ring is fitted to the rotor head centre piece, the steel pin slides in the guide slot of the pitch compensator. Rotate the clamp for fine adjustment so that your helicopter flies straight when you apply a pitch-axis command.Clamp ring for pitch compensator 17 mm Ø, length of the pin 30 mm.

Prix 27,40 €
Détails
En vente sur demande

Suivez-nous sur Facebook

Facebook