Marques

No brand

Fournisseurs

Référence: 92/91

Flanged ballrace 6 x 10 x 3 mm

Commentaire(s): 0

Ballraces are used wherever moving parts are required to run with a minimum of play and a minimum of friction. The more ballraces are used, the more smoothly the mechanics of a helicopter works, and the lower the rate of wear. The dimensions of a ballrace mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness. For flanged bearings the same...

Prix 14,70 €
Détails
En vente sur demande
Toutes les meilleures ventes

Plancher BENZIN Acrobatic

834/53
Note 



The rugged aluminium base plate accommodates the complete mechanics assembly of the Acrobatic trainer. For the installation and removal of the engine it is not essential to dismantle the base plate from the side frames.

141,80 €
Quantité
En vente sur demande

 

Política de seguridad

 

Política de envío

 

Política de devolución

Description



The rugged aluminium base plate accommodates the complete mechanics assembly of the Acrobatic trainer. For the installation and removal of the engine it is not essential to dismantle the base plate from the side frames.

Détails du produit
834/53
Avis

Aucun avis n'a été publié pour le moment.

Donnez votre avis

Plancher BENZIN Acrobatic

Plancher BENZIN Acrobatic



The rugged aluminium base plate accommodates the complete mechanics assembly of the Acrobatic trainer. For the installation and removal of the engine it is not essential to dismantle the base plate from the side frames.

Donnez votre avis
16 autres produits dans la même catégorie :

Référence: 1002/32

Tail servo bracket

Commentaire(s): 0

If you prefer to mount the tail rotor servo in the mechanics rather than inside the fuselage, this is the accessory you need.

Prix 54,60 €
Détails
En vente sur demande

Référence: 49/16

Retaining spring

Commentaire(s): 0

If your helicopter accidentally makes ground contact, the claw coupling may disengage, and the cruciform element may be lost. Fitting an annular retaining spring ensures exact alignment of the claw coupling, and prevents the cruciform element slipping out.  Retaining springpack of 2

Prix 4,00 €
Détails
En vente sur demande

Référence: 53

Dome plate GRP

Commentaire(s): 0

At the top of the mechanics the dome plate supports the rotor shaft with the help of a 10 x 21 x 5 mm or 12 x 21 x 5 mm ballrace. To reduce the load on the ballrace a thrust bearing can also be fitted under the dome plate.

Prix 17,00 €
Détails
En vente sur demande

Référence: 834/50

Side frame for BENZIN Acrobatic

Commentaire(s): 0

The outstanding features of the BENZIN Acrobatic models are mainly based on these side frames. The engine moved to the front to optimise the CofG.Installation of an on-board electric starter as an option.CCPM - i.e. direct linkage at 4-points / 90 degreeInstallation of the tank below the main rotor shaft, i.e. while the tank runs dry the CofG does not...

Prix 131,70 €
Détails
En vente sur demande

Référence: 36/40

Reinforced freewheel bell compl.

Commentaire(s): 0

Provided that you maintain your model helicopter conscientiously and set it up according to the instructions, the model's flying load limits are well outside its normal flight envelope.Detail features of the kit are designed to suit normal applications, but different parts can be retro-fitted at any time, e.g. if you wish to convert a Kobold into a...

Prix 131,70 €
Détails
En vente sur demande

Référence: 870/200

R. H. conversion set X-Treme

Commentaire(s): 0

For the conversion of a L.H. X-Treme trainer into a R.H. mechanics needed parts are assembled in this set. This set contains all the parts required for the conversion of a L.H. X-Treme trainer into R.H. mechanics.

Prix 269,70 €
Détails
En vente sur demande

Suivez-nous sur Facebook