Accueil
Marques

No brand

Fournisseurs
Meilleures Ventes
Flanged ballrace 6 x 10 x 3 mm Aperçu rapide

Référence: 92/91

Flanged ballrace 6 x 10 x 3 mm

Commentaire(s): 0

Ballraces are used wherever moving parts are required to run with a minimum of play and a minimum of friction. The more ballraces are used, the more smoothly the mechanics of a helicopter works, and the lower the rate of wear. The dimensions of a ballrace mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness. For flanged bearings the same...

Prix 14,70 €
Détails
En vente sur demande
Toutes les meilleures ventes

Screw fitting pushrod connector

97/9
Note 



Screw fixing pushrod connectors can be used on bell-cranks and servo output arms at the tail rotor servo, so that the tail rotor pushrod can quickly be installed, disconnected and adjusted. A further advantage is that a hardened steel pushrod can be used. For one helicopter you need two pushrod connectors.

Caution during installation: the barrel of the connector must be free to rotate on the servo output arm or crank. Either use a 2 mm self-locking nut, or apply a little thread-lock fluid when fitting the M 2 hexagon nut. Be sparing with the fluid! Tighten the M 3 x 4 socket-head cap screw well to hold the pushrod securely. Do not use thread-lock fluid.

Screw fitting pushrod connector, with screw and nut, linkages of 1.5 - 2.0 mm

6,30 €
TTC
Quantité
En vente sur demande

 

Política de seguridad

 

Política de envío

 

Política de devolución

Description



Screw fixing pushrod connectors can be used on bell-cranks and servo output arms at the tail rotor servo, so that the tail rotor pushrod can quickly be installed, disconnected and adjusted. A further advantage is that a hardened steel pushrod can be used. For one helicopter you need two pushrod connectors.

Caution during installation: the barrel of the connector must be free to rotate on the servo output arm or crank. Either use a 2 mm self-locking nut, or apply a little thread-lock fluid when fitting the M 2 hexagon nut. Be sparing with the fluid! Tighten the M 3 x 4 socket-head cap screw well to hold the pushrod securely. Do not use thread-lock fluid.

Screw fitting pushrod connector, with screw and nut, linkages of 1.5 - 2.0 mm

Détails du produit
97/9
Avis

Aucun avis n'a été publié pour le moment.

Donnez votre avis

Screw fitting pushrod connector

Screw fitting pushrod connector



Screw fixing pushrod connectors can be used on bell-cranks and servo output arms at the tail rotor servo, so that the tail rotor pushrod can quickly be installed, disconnected and adjusted. A further advantage is that a hardened steel pushrod can be used. For one helicopter you need two pushrod connectors.

Caution during installation: the barrel of the connector must be free to rotate on the servo output arm or crank. Either use a 2 mm self-locking nut, or apply a little thread-lock fluid when fitting the M 2 hexagon nut. Be sparing with the fluid! Tighten the M 3 x 4 socket-head cap screw well to hold the pushrod securely. Do not use thread-lock fluid.

Screw fitting pushrod connector, with screw and nut, linkages of 1.5 - 2.0 mm

Donnez votre avis
16 otros productos en la misma categoría:

Suivez-nous sur Facebook

Facebook