Réservoir pour Kérosène 1,5 l

Reference: 26/32

Schlauchsicherung für Methanol

Reference: 3720

Filling station for petrol 3 l capacity

This refuelling station for petrol helicopters consists of a petrol-proof container of 3 litres capacity, a hand-pump for filling and emptying, fittings and filler hose.

Reference: 412/26

Fuel tank for Kerosene 2 l for Bell 412

dimensions: approx. 38.5 x 18 x 4.5 cm (height of the nose: 9 cm)

Reference: 206/26

Kerosene Tank 2.2 l, Turbine UH-1D

Kerosene Tank 2.2 l, GRP, with accessories, for UH-1D with Turbine

Reference: 116/5

Fuel tank nipple / Pressure nipple M 5

Content of the packag: 1 piececomplete as shown

Reference: 26/25

Tank vent filter

Tank vent filter, to prevent dirt and other foreign objects from entering fuel supply.

Reference: 13/28

Tanknippel für Benzin/Kerosin/Methanol

Reference: 26/1

Fuel tubing plug

Fuel tubing plug pack of 3

Reference: 830/68

Fine-mesh petrol and kerosine filter

Chemical analysis used in Formel 1 is able to determine 1 g of impurity within 1 ton of oil. To fulfill your demand on the cleanness of the fuel for your model helicopter you use the fine-mesh petrol filter inside the fuel tubing between the tank and the carburettor. Also suitable for kerosine turbine fuel.

Reference: 26/31

Spritschlauch-Klemme

Reference: 13/27

Carenado de la válvula de llenado

Reference: 13/25

Válvula de llenado para metanol y bencina

Reference: 26/5

Tank for Kerosene 1.25 l

Tank for Kerosene, 1250 ml, 2 x required for the Lama

Reference: 834/26

Tank 540 ccm für Benzin

Reference: 26/50

Kevlartank for Kerosene 1.4 l

Aramid is a fibre that is used in motor racing. The tanks have an even surface inside and rough on the outside. These fuel tanks are all pressure tested to make sure that they are 100% leak-proof when they arrive at your workshop. They fit in every fuselage, that would normally use the plastic tank Ord.No. 26/5 for. For example, this Aramid tank is...

Reference: 3741

Separate pump holder and hand wind pump

Separate pump holder and hand wind pump, suitable for fitting to the 10 L fuel container.