Home
Marchi

Nessuna marca

Fornitori
Migliori vendite
Flanged ballrace 6 x 10 x 3 mm Anteprima

Riferimento: 92/91

Flanged ballrace 6 x 10 x 3 mm

Recensioni: 0

Ballraces are used wherever moving parts are required to run with a minimum of play and a minimum of friction. The more ballraces are used, the more smoothly the mechanics of a helicopter works, and the lower the rate of wear. The dimensions of a ballrace mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness. For flanged bearings the same...

Prezzo 14,70 €
Più
In vendita su richiesta
Aste 3,0 x 75 mm Anteprima

Riferimento: 70/76

Aste 3,0 x 75 mm

Recensioni: 0

Ready-made pushrod, threaded M 3. Content of the package: 1 piece

Prezzo 6,30 €
Più
In vendita su richiesta
Tutte le migliori vendite

Anello 5 x 9 mm

832/47
Valutazione 



O-ring 5 x 9 mm
Content of the package: 2 pieces
Tip: O-rings always slide with a drop of silicone oil onto the shaft.

7,60 €
Tasse incluse
Quantità
In vendita su richiesta

 

Política de seguridad

 

Política de envío

 

Política de devolución

Descrizione



O-ring 5 x 9 mm
Content of the package: 2 pieces
Tip: O-rings always slide with a drop of silicone oil onto the shaft.

Dettagli del prodotto
832/47
Recensioni

Ancora nessuna recensione da parte degli utenti.

Scrivi la tua recensione

Anello 5 x 9 mm

Anello 5 x 9 mm



O-ring 5 x 9 mm
Content of the package: 2 pieces
Tip: O-rings always slide with a drop of silicone oil onto the shaft.

Scrivi la tua recensione
16 autres produits dans la même catégorie :
Clamp ring pitch... Aperçu rapide

Référence: 54/13

Clamp ring pitch compensator 10 mm

Commentaire(s): 0

On longer rotor shafts the clamp ring for the pitch compensator sits underneath of the centre piece directly on the rotor shaft.Clamp ring for pitch compensator 10 mm Ø, length of the pin 30 mm.

Prix 27,40 €
Détails
En vente sur demande
Clamp ring pitch... Aperçu rapide

Référence: 54/16

Clamp ring pitch compensator 17 mm

Commentaire(s): 0

The 17 mm Ø clamp ring is fitted to the rotor head centre piece, the steel pin slides in the guide slot of the pitch compensator. Rotate the clamp for fine adjustment so that your helicopter flies straight when you apply a pitch-axis command.Clamp ring for pitch compensator 17 mm Ø, length of the pin 30 mm.

Prix 27,40 €
Détails
En vente sur demande
Rotor brake, GRP Aperçu rapide

Référence: 72/4

Rotor brake, GRP

Commentaire(s): 0

When you have landed and stopped the engine, the rotor head continues spinning for quite some time until it stops by itself. A rotor brake shortens the time you have to wait. Using light pressure with the flat of your hand on the domed face of the rotor brake you can stop the rotor in a few moments.Please note: stay in safe distance away from the turning...

Prix 14,70 €
Détails
En vente sur demande

Seguici su Facebook

Facebook