Marques

No brand

Fournisseurs

Référence: 92/91

Flanged ballrace 6 x 10 x 3 mm

Commentaire(s): 0

Ballraces are used wherever moving parts are required to run with a minimum of play and a minimum of friction. The more ballraces are used, the more smoothly the mechanics of a helicopter works, and the lower the rate of wear. The dimensions of a ballrace mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness. For flanged bearings the same...

Prix 14,70 €
Détails
En vente sur demande
Toutes les meilleures ventes

Aluminium centre piece, 12 mm

72/45
Note 

Aluminium centre piece for 12 mm Ø main shaft

108,30 €
TTC
Quantité
En vente sur demande

 

Política de seguridad

 

Política de envío

 

Política de devolución

Description

Aluminium centre piece for 12 mm Ø main shaft

Détails du produit
72/45
Avis

Aucun avis n'a été publié pour le moment.

Donnez votre avis

Aluminium centre piece, 12 mm

Aluminium centre piece, 12 mm

Aluminium centre piece for 12 mm Ø main shaft

Donnez votre avis
16 autres produits dans la même catégorie :

Référence: 76/19

GRP blade holder, 5 mm ∅ hole

Commentaire(s): 0

As demands on helicopters continue to rise, so stronger blade holders are required. In this case a 14 mm blade holder is combined with a 5 mm Ø hole for blade retention, i.e. the matching blade holder screws and self-locking nuts are M5 in size.GRP blade holder with short linkage armfor multi-blade rotor heads

Prix 30,60 €
Détails
En vente sur demande

Référence: 74/12

O-ring 3 x 12 mm hard

Commentaire(s): 0

O-ring 3 x 12 mm hard Content of the package: 8 pieces Tip: O-rings always slide with a drop of silicone oil onto the shaft.

Prix 5,50 €
Détails
En vente sur demande

Référence: 79/10

Barre de Bell inox 4 x 510 mm

Commentaire(s): 0

The length of the flybar itself also plays an important role in the model's flight characteristics: the longer the flybar, the smoother the hover. A longer flybar increases the control deflections. 450 mm length is considered normal, while 510 mm provides more docile handling.

Prix 19,40 €
Détails
En vente sur demande

Référence: 72/5

Rotor brake, GRP

Commentaire(s): 0

When you have landed and stopped the engine, the rotor head continues spinning for quite some time until it stops by itself. A rotor brake shortens the time you have to wait. Using light pressure with the flat of your hand on the domed face of the rotor brake you can stop the rotor in a few moments.Please note: stay in safe distance away from the turning...

Prix 14,70 €
Détails
En vente sur demande

Référence: 78/40

Kit mélangeurs

Commentaire(s): 0

Mixer levers are an essential part of every flybar-controlled rotor head. From the swashplate a pushrod runs to the ballraced mixer arm which is screwed to the blade holder arm. The mixer levers transmit the control movement to the flybar via the double ball-link.Additionial accessories for the use of mixer levers are either two flanged ballraces or two...

Prix 37,50 €
Détails
En vente sur demande

Référence: 72/1

Frein rotor en CFK

Commentaire(s): 0

When you have landed and stopped the engine, the rotor head continues spinning for quite some time until it stops by itself. A rotor brake shortens the time you have to wait. Using light pressure with the flat of your hand on the domed face of the rotor brake you can stop the rotor in a few moments. Pease note: stay in safe distance away from the turning...

Prix 50,50 €
Détails
En vente sur demande

Référence: 68/19

Bearing pin

Commentaire(s): 0

Bearing pin for swashplate driver 68/20. Content of the package: 1 piece.

Prix 11,20 €
Détails
En vente sur demande

Référence: 832/74

Joint torique 9 x 4.5 mm

Commentaire(s): 0

O-ring 9 x 4.5 mm Content of the package: 4 pieces Tip: O-rings always slide with a drop of silicone oil onto the shaft.

Prix 13,50 €
Détails
En vente sur demande

Suivez-nous sur Facebook