Home
Marchi

Nessuna marca

Fornitori
Migliori vendite
Flanged ballrace 6 x 10 x 3 mm Anteprima

Riferimento: 92/91

Flanged ballrace 6 x 10 x 3 mm

Recensioni: 0

Ballraces are used wherever moving parts are required to run with a minimum of play and a minimum of friction. The more ballraces are used, the more smoothly the mechanics of a helicopter works, and the lower the rate of wear. The dimensions of a ballrace mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness. For flanged bearings the same...

Prezzo 14,70 €
Più
In vendita su richiesta
Tutte le migliori vendite

Stainless steel tail drive system

17/10
Valutazione 

When a 2 mm steel drive wire is used between main gearbox and tail gearbox the tail rotor might yaw the heli during acrobatics (e.g. turn), because the wire might "wind up". At this moment a small "wind up" will cause a small change of tail rpm, which requires steering corrections.
A so-called "rigid" tail drive system gives a more exact drive to the tail rotor.
This version (for installation in a fuselage) uses a 980 mm long stainless steel drive tube. The length allows mounting in nearly all fuselages; claw connectors 49/12 in main gearbox and tail gearbox are required.
Tail drive system, complete as shown.

75,80 €
Tasse incluse
Quantità
In vendita su richiesta

 

Política de seguridad

 

Política de envío

 

Política de devolución

Descrizione

When a 2 mm steel drive wire is used between main gearbox and tail gearbox the tail rotor might yaw the heli during acrobatics (e.g. turn), because the wire might "wind up". At this moment a small "wind up" will cause a small change of tail rpm, which requires steering corrections.
A so-called "rigid" tail drive system gives a more exact drive to the tail rotor.
This version (for installation in a fuselage) uses a 980 mm long stainless steel drive tube. The length allows mounting in nearly all fuselages; claw connectors 49/12 in main gearbox and tail gearbox are required.
Tail drive system, complete as shown.

Dettagli del prodotto
17/10
Recensioni

Ancora nessuna recensione da parte degli utenti.

Scrivi la tua recensione

Stainless steel tail drive system

Stainless steel tail drive system

When a 2 mm steel drive wire is used between main gearbox and tail gearbox the tail rotor might yaw the heli during acrobatics (e.g. turn), because the wire might "wind up". At this moment a small "wind up" will cause a small change of tail rpm, which requires steering corrections.
A so-called "rigid" tail drive system gives a more exact drive to the tail rotor.
This version (for installation in a fuselage) uses a 980 mm long stainless steel drive tube. The length allows mounting in nearly all fuselages; claw connectors 49/12 in main gearbox and tail gearbox are required.
Tail drive system, complete as shown.

Scrivi la tua recensione
16 andere Artikel in der gleichen Kategorie:

Seguici su Facebook

Facebook