AIRWOLF 1:5 - Fuselage kit

Référence: 500/19

Toothed belt pulley 20-tooth XL

Not available

Référence: 3304

Kit propulsion électrique pour mécanique électro-turbine

Incl. motor, controller, new machined motor mount Flight time, 12S LiPo, 8 Ah, approx. 12 Minutes, depending on the model weight.For use with Vario Turbine electric mechanics 1002/76, 1002/77 and 1002/78:1002/76: BK 117, Ord.No. 7700; Hughes 500E, Ord.No. 90041002/77: Bo 105, Ord. No. 6005; Airwolf, Ord.No. 2004; Bell 430, Ord.No. 4340, Bell 230, Ord.No....

Référence: 13/32

Systéme de remplissage pour kérosène

The kerosene refuelling system is sealed with a rubber nipple. The constant low pressure inside the tank draws the nipple firmly against the refuelling opening. That is also the reason why a mechanism such as a spring-controlled valve is not suitable, because the low pressure tends to push the spring back as spring tension diminishes.

Référence: 1005/49

Tête rotor pour Bell 230 ou AIRWOLFOrd.No. 1005/49

This rotor head is specially designed for the use with an AIRWOLF or a Bell 230.Rotor shaft 12 mm, rotor disc 2360 mmOrd.No. 1005/52 is for a Ø 15 mm rotor shaft and Ord.No. 1005/49 for a Ø 12 mm rotor shaft

Référence: 722/72

Tête de rotor VR-22

The loading of every component of this rotor system is designed to take a multiple of the actual forces. We are looking here at purely safety reserves and under no cirumstances should they be used for experimental purposes.Because of the special requirements of materials used in the rotor head, we expressly recommend that only genuine VARIO spare parts...

Référence: 70/61-2

Tringle 3,0 x 60 mmOrd.No. 70/61-2

Ready-made pushrod, threaded M 3. Pack of 2

Référence: 70/121

Tringle 3,0 x 120 mm

Ready-made pushrod, threaded M 3. Content of the package: 1 piece

Référence: 060/9

Axe à rotule 8,0 mm - M 3,5 x 3,0

In our range of products we provide ball-end bolts made of hard-chromed steel with an excellent surface quality, and with different ball sizes, but mainly used are those with a diameter of 4.8 mm. Please check before you order that you have selected the correct ball-end bolt. Measure the ball, the diameter and the length of the thread to be on the safe...

Référence: 53/19

Dome fittings set for PHT3-L

Dome fittings set for JetCat PHT3-L turbine

Référence: 413

2-blade-set 2360 mm

Specification 2-blade-set length: 1050 mm rotor disc: 2360 mm blade root: 22 mm 1-hole blade chord: 75 mm profile thickness: 11 mm weight: ca. 450 g material: CFRP Shark Skin finish: anthracite matt symmetry: reflex l.h.r.

Référence: 68/50

Swashplate driver 12 mm

 Swashplate driver, metal4 ballracesweigth approx. 25.8 gsuitable for 12 mm Ø main shafts

Référence: 722/71

Collective pitch compensator 12 mm

Pitch compensator, complete, for 12 mm Ø main shaft, centre piece aluminium.For use with the rotor head Ord.No. 722/72.

Référence: 1003/80

2-blade tail rotor ø 6 mm aluminium

Référence: 34/32

Tail rotor blades 156 mm, grey

Tail rotor blade, rotor disc 390 mm ØSpecification 8.0 mm blade root16.5 g approx.45.5 mm blade chordGRP6.7 mm profile thicknesssymmetrical156 mm longbalanced1 pairThe tail rotor blades are designed exclusively for use with the specified VARIO mechanics in conjunction with the tail rotor 1003/80. The maximum rotational speed of the tail rotor shaft is...

Référence: 49/12

Claw connector, shaft 5 mm

 Claw connector with 5 mm shaftlength of the steel shaft 22 mm

Référence: 3174

Switch module for rocket launcher

Switch module for rocket launcherNot suitable for 2S (HV), only for 4.8 Volt (4 cells NiMh)

Référence: 10/420

Stub wings

Stub wings are available prepared for direct MG installation, making construction even easier.1 pair, for AIRWOLF Ord.No. 2004 only

Référence: 20/43

Scale metal fittings, Bell 430/230/Airwolf 1:5

On the Din A 4 large plate of 0.2 mm stainless steel fittings are the following milled and prepared to cut out:120 hood hinges4 true original door handles2 long and 2 shorter door fittings2 grille 5.6 x 2.9 cm2 ventilation grid 5.6 × 4.9 cmTwo triangular ventilation grille2 ventilation openings window

Référence: 1/55

Pilot Paul, 1:5, white long sleeve + jeans

Pilot Paul 360 mm Scale 1:5 white long sleeve top + jeans Made in Germany

Référence: 1/59

Pilot Paul 1:5, long sleeve + trousers

Pilot Paul 360mm Scale 1:5 long sleeve top + trousers Made in Germany

Référence: 995

RC system accessories incl. 5 servos

If you already own a radio control system and then purchase a second model helicopter, the next step is to consider carefully which electronic components are the best choice for the new model.The combination illustrated here comprises accessories which have proved excellent in practice. RC system accessories, with Futaba BLS 452 servos excluding radio...