Schweizer 300C 1:5 - Fuselage kit

Référence: 603/0

Autocollant Schweizer 300 C

Les autocollants avec insignes spécifiques, immatriculation et consignes, sont imprimés sur un film transparent. Découpez les différents motifs avec un cutter et une règle métallique (réf....

Référence: 603/22

Kit cabine Schweizer 300 C

 Fiberglass front cabin and lower chin for 300C kit

Référence: 603/30

Kit verrières Schweizer 300 C

 Schweizer 300 C glazing setsmoked tintnot trimmed

Référence: 3307

Kit propulsion électrique pour mécanique benzin 12S

For the conversion of benzin mechanics to electric

Référence: 3308

Kit propulsion électrique pour mécanique benzin 10S

For the conversion of benzin mechanics to electric

Référence: 3314/6

Propulsion électrique pour SkyFox 1500 mm 6S

kit content:electric motor Kontronik Pyro 700-52 Lcontroller Kontronik JIVE 100+ LVmotor mounttoothed belt pulley 58 t. / 33 t.mounting materialKontronik TelMe can only be used with controllers Kontronik 120 JIVE Pro and higher.

Référence: 35/20

Axe rotor 10 x 294 mm

 Use with a Schweizer 300 Cwith multi-blade head only!

Référence: 35/41

Axe rotor 10 x 286 mm

 Rotor shaftfor multi-blade headhole spacing 35 mmuse with a Schweizer 300 C with multi-blade head only!

Référence: 26/100

Benzin kit incl. fuel tank 540 ccm

Not available

Référence: 830/68

Filtre à essence, mailles fines

Chemical analysis used in Formel 1 is able to determine 1 g of impurity within 1 ton of oil. To fulfill your demand on the cleanness of the fuel for your model helicopter you use the fine-mesh petrol filter inside the fuel tubing between the tank and the carburettor. Also suitable for kerosine turbine fuel.

Référence: 830/83

Durite d'essence 1m

Fuel tubing for petrolapprox. 1 mtransparentFuel tubing inevitably suffers from the effects of ageing. Always replace brittle tubing before it gives problems! 

Référence: 703/30

Tête 3-pales 10 mm

Des têtes de rotor avec trois ou plusieurs pales constituent un chapitre à part dans le domaine de l'hélicoptère modèle réduit. Nombreux pilotes ressentent l'envie de piloter un jour une...

Référence: 404/30

Jeu 3-pales 1600 mm

Specification 3-blade-set length: 725 mm rotor disc: 1600 mm blade root: 14 mm 2-hole blade chord: 53 mm profile thickness: 6.8 mm weight: ca. 175 g material: CFRP Shark Skin finish: anthracite matt symmetry: reflex l.h.r.

Référence: 404/40

Jeu 3-pales 1680 mm

Specification3-blade-setlength: 765 mmrotor disc: 1680 mmblade root: 14 mm 2-holeblade chord: 53.0 mmprofile thickness: 6.8 mmweight: ca. 185 gmaterial: CFKShark Skin finish: anthracite mattsymmetry: reflex, l.h.r.

Référence: 603/11

Stabiliser set Schweizer 300 C

 Stabiliser set, GRP2-partfor Schweizer 300 C with a length up to approx. 1 700 mm

Référence: 603/1

Skid landing gear for Schweizer 300 C

Skid landing gear for Schweizer 300 Coriginal kit accessoriescomplete as shown

Référence: 603/17

Adaptor 20/33, Schweizer 300 C

Component part for fuselages, Ord.No. 6030 or 6031.

Référence: 603/18

Adaptor 20/33, Schweizer 300 C

Component part for fuselages, Ord.No. 6030 or 6031.

Référence: 603/3

Bulkhead set Schweizer 300 C

Component part for fuselage, Ord.No. 6030.

Référence: 603/6

Tail skid 180 mm, stainless steel

Component part for fuselages, Ord.No. 6030 or 6031.

Référence: 890/25

Cooling fan support for Schweizer 300 C

Component part for fuselage, Ord.No. 6030 or 6031.

Référence: 603/16

Tail boom set, Schweizer 300 C

Component part for fuselages, Ord.No. 6030 or 6031.

Référence: 1002/21

Petrol mechanics 90:18

Référence: 830/101

Electric Benzin Conversion Kit, 6mm shaft

Benzin-Trainer to electric conversion?..why not! Here is a rather simple way to convert your Benzin Trainer to electric power. Remove the Petrol motor and exhaust and replace it with an electric motor of your choice. The motor mount retrofit set can be used with the most common electric motors. This conversion set can also be used with the Benzin fuselage...

Référence: 1002/15

Electric "Skyfox" mechanics

Including metal internal tooth gear!These are the electric Skyfox mechanics which are used with one of the following conversion sets for the required gear ratio.Mechanics excludes motor, motor mount, and motor gears... see below.Following the trend for electric models, Vario have produced an electric conversion set for the popular Skyfox mechanics. The...

Référence: 116/95

Silencer system

 Silencer systemIntake pipe 170 mmSilencer chamber 195 mmOverall Ø 50 mmManifold: 34 mm hole spacingTail pipe length 80 mmWeight approx. 390 g

Référence: 1022/13

Carburettor intake trumpet

This screw-fitting carburettor intake trumpet is designed to improve the flow of air entering the carburettor. Complete with screws and gasket.

Référence: 4321

Suppressed plug cap for petrol engine G230 / G240

Suppressed plug cap to protect the radio control system from potential interference caused by the ignition system

Référence: 33/3

Rotor blade pouch 3-blade Ø 2500 mm

Référence: 68/20

Swashplate driver 10 mm

Where a pitch compensator sits and two pushrods connect to the flybar, this is now a swashplate driver in its place.This is necessary to drive the inner ring of the swashplate in order to always control the blade angle in the same position.Aluminium swashplate driver with 4 ballraces.

Référence: 34/30

Tail rotor blades 130 mm

Tail rotor bladesSpecification 8.0 mm blade root8.7 g approx.29 mm blade chord5.0 mm profile thicknesssymmetrical130 mm longbalanced1 pair

Référence: 1/55

Pilot Paul, 1:5, white long sleeve + jeans

Pilot Paul 360 mm Scale 1:5 white long sleeve top + jeans Made in Germany

Référence: 1/59

Pilot Paul 1:5, long sleeve + trousers

Pilot Paul 360mm Scale 1:5 long sleeve top + trousers Made in Germany

Référence: 995

RC system accessories incl. 5 servos

If you already own a radio control system and then purchase a second model helicopter, the next step is to consider carefully which electronic components are the best choice for the new model.The combination illustrated here comprises accessories which have proved excellent in practice. RC system accessories, with Futaba BLS 452 servos excluding radio...

Référence: 70/40-3

Gestänge 2,5 x 40 mmOrd.No. 70/40-3

Référence: 603/27

Auffangwanne für Tank Schweizer 300 C

Référence: 603/12

Kufenrohr 12 mm Schweizer 300

Référence: 3619

Set de fotos Schweizer 300 en CD