Marques

No brand

Référence: 97/4

Servo linkage set

Commentaire(s): 0

When you build your first model helicopter you will find all the linkage components required to connect the servos to the mechanics supplied with the RC set (German radio systems only). When you come to installing servos in other models you can use this servo linkage set which contains all the link balls, screws, nuts and screw-fitting pushrod...

Prix 40,10 €
Détails
En vente sur demande
Toutes les meilleures ventes

Chinook 1:11 - Fuselage kit

4800.ei
Note 

The Chinook from VARIO is a 700 size scale helicopter. You can power this remote-controlled model helicopter with electric propulsion. Boeing-Vertol is the creator of the man-carrying version and...

Motorisation
2 701,60 €
Quantité
En stock

 

Política de seguridad

 

Política de envío

 

Política de devolución

Description

The Chinook from VARIO is a 700 size scale helicopter. You can power this remote-controlled model helicopter with electric propulsion. Boeing-Vertol is the creator of the man-carrying version and produces this helicopter. Building a tandem has its own charm and its own set of challenges. This kit and the specially developed equipment has been extensively tested before its launch. It is necessary for a tandem rotor to have a strong rigid construction which ensures the success of this model project. To ensure the success of this project, VARIO sells the fuselage kit including the mechanics. For safety reasons, it is compulsory to mount the specific VARIO tandem rotor heads.For the summer of 2016 VARIO have given the Chinook fuselage a total face lift. The new fuselage is now the same GRP quality as other fuselages produced since 2014. The fuselage has more external detail especially around the upper domes and transmission tunnel. All fuselage moldings including the doors have been completely revised and to further complement the new fuselage a set of smart bubble windows are now included. Like the full size you can equip the Chinook with contra rotating dome covers.For VARIO's 700 Boeing-Vertol CH-47 we recommend a main rotor speed of approx. 1150 rpm.Here you find the software setup for the Bavarian Demon. Caution! Take care of the servo direction and mounting orientation of the sensor box which need individual setup according to your model.Available for:Tandem Electric Mechanics 480/22 included in fuselageOur propulsion recommendation for this helicopter (Ord.No. 4800)! Contemporary mechanics, especially designed for the scale model electric flight. Electric motors are quiet, low in vibration, without exhaust gases and residual thrust. The blade slap noise sound of the rotor blades is more noticeable than with other types of propulsion and the result is a true-to-life impression in flight. For this electromechanical system we offer drive components for 12S LiPos.

Détails du produit
4800.ei

Fiche technique

Échelle
1:11
Longueur
1420 mm
Le poids
ca. 10 kg
Largeur
830 mm
Hauteur
350 mm
Diamètre du rotor
2x Ø 1550 mm
Documents joints
Téléchargement
Avis

Aucun avis n'a été publié pour le moment.

Donnez votre avis

Servo linkage set

Servo linkage set



When you build your first model helicopter you will find all the linkage components required to connect the servos to the mechanics supplied with the RC set (German radio systems only).
When you come to installing servos in other models you can use this servo linkage set which contains all the link balls, screws, nuts and screw-fitting pushrod connectors.
Servo linkage set, 18-part

Donnez votre avis
Vous aimerez aussi

Référence: 404/480

Jeu 2x3-pales 1550 mm

Commentaire(s): 0

Specification 2x3-blade-set length: 675 mm rotor disc: 1550 mm blade root: 14 mm 2-hole blade chord: 53 mm profile thickness: 6.8 mm weight: ca. 165 g material: CFRP Shark Skin finish: anthracite matt symmetry: reflex l.h.r. + r.h.r.

Prix 498,50 €
Détails
En vente sur demande

Référence: 68/20

Swashplate driver 10 mm

Commentaire(s): 0

Where a pitch compensator sits and two pushrods connect to the flybar, this is now a swashplate driver in its place.This is necessary to drive the inner ring of the swashplate in order to always control the blade angle in the same position.Aluminium swashplate driver with 4 ballraces.

Prix 75,80 €
Détails
En vente sur demande

Référence: 480/53

Co-rotating dome coverage-set

Commentaire(s): 0

You can fit to your Chinook heads a plate each that covers the dome and spins with the rotor head rpm. A pretty detail, that also can be found on the original Chinook helicopters. The plates / dome covers are mounted on the clamp rings of the main shafts.Pack of 2 plates incl. mounting material

Prix 153,40 €
Détails
En vente sur demande

Référence: 3935/2

Servo extension lead 1050 mm

Commentaire(s): 0

When extending servo cables take into account that cable lengths over 500 mm requires a suppressor (Ord.No. 1040) to avoid interference.

Prix 12,80 €
Détails
En vente sur demande

Référence: 3935/3

Servo extension lead 450 mm

Commentaire(s): 0

When extending servo cables take into account that cable lengths over 450 mm requires a suppressor (Ord.No. 1040) to avoid interference.

Prix 9,70 €
Détails
En vente sur demande

Référence: 14/480

Car sticker Chinook silver

Commentaire(s): 0

Car stickers show everyone immediately that you are a member of the helicopter scene. These stickers are factory-trimmed, and make it possible to transfer only the finely cut lines onto the base surface you have choosen. The stickers adhere very well, and do not fade.Color: silverSize approx. 80 x 200 mm

Prix 26,60 €
Détails
En vente sur demande
16 autres produits dans la même catégorie :

Référence: 2060.e

Bell 205 UH-1D 1:6 - Fuselage kit

Commentaire(s): 0

The "big Bell UH-1D" from VARIO is a 1050 size scale helicopter. You can power this remote-controlled model helicopter with turbine or electric propulsion. Bell Helicopter is the creator of the...

Prix 1 377,30 €
Détails
En stock

Référence: 2040.e

Bell 204 UH-1B 1:7 - Fuselage kit

Commentaire(s): 0

The "UH-1B" from VARIO is a 800 size scale helicopter. You can power this remote-controlled model helicopter with gasoline (benzin) or electric propulsion. Bell Helicopter is the creator of the man-carrying version. Following the full size helicopter the model also has an exceptionally long rotor shaft. In comparison to the Bell 205, the 204 version has...

Prix 623,80 €
Détails
En stock

Référence: 9000.e

Ecureuil AS 350 1:4 - Fuselage kit

Commentaire(s): 0

The "big Ecureuil" from VARIO is a 1050 size scale helicopter. You can power this remote-controlled model helicopter with turbine or electric propulsion. Aérospatiale is the creator of the...

Prix 1 890,40 €
Détails
En vente sur demande

Référence: 2005.s

Bell 222 1:8 - Fuselage kit

Commentaire(s): 0

The Bell 222 from VARIO is a 650 size scale helicopter. You can power this remote-controlled model helicopter with electric propulsion. Striking is the streamlined design and high-profile wing stubs. These provide additional lift in forward flight and serve as a housing for the retractable landing gear. Compared to other helicopters the tail boom is...

Prix 516,80 €
Détails
En stock

Référence: 4300.e

Bell 430 1:7 - Fuselage kit

Commentaire(s): 0

The "small Bell 430" from VARIO is a 700, resp. 750 size scale helicopter. You can power this remote-controlled model helicopter with gasoline (benzin) or electric propulsion. When it comes to...

Prix 1 026,30 €
Détails
En stock

Référence: 9500.e

Exec 1:3 - Fuselage kit

Commentaire(s): 0

The Exec from VARIO is a 1050 size scale helicopter. You can power this remote-controlled model helicopter with electric propulsion. RotorWay International is the creator of the man-carrying version and produces the full-size kit helicopter. The VARIO version has a detachable tail boom. For VARIO's 1050 Exec we recommend a main rotor speed of approx....

Prix 1 247,80 €
Détails
En vente sur demande

Référence: 2140.e

Bell 212 1:6 - Fuselage kit

Commentaire(s): 0

The "big Bell 212" from VARIO is a 1050 size scale helicopter. You can power this remote-controlled model helicopter with turbine or electric propulsion. Bell Helicopter is the creator of the...

Prix 1 448,50 €
Détails
En stock

Référence: 2050.e

Bell 205 UH-1D 1:7 - Fuselage kit

Commentaire(s): 0

The "UH-1D" from VARIO is a 800 size scale helicopter. You can power this remote-controlled model helicopter with gasoline (benzin) or electric propulsion. Bell Helicopter is the creator of the man-carrying version. Following the full size helicopter the model also has an exceptionally long rotor shaft. In comparison to the Bell 205, the 204 version has...

Prix 788,80 €
Détails
En stock

Référence: 1200.e

H120 (EC120) 1:4 - Fuselage kit

Commentaire(s): 0

The H120 from VARIO is a 1050 size scale helicopter. You can power this remote-controlled model helicopter with turbine or electric propulsion. Eurocopter is the creator of the man-carrying version and Airbus Helicopters produces this helicopter. The EC 120 (H 120) is a large model made more impressive by its specially developed dome mechanics which...

Prix 1 855,10 €
Détails
En vente sur demande

Référence: 1112.e

JetRanger XL 1:4 - Fuselage kit

Commentaire(s): 0

The "JetRanger XL" from VARIO is a 1150 size scale helicopter. You can power this remote-controlled model helicopter with turbine or electric propulsion. Bell Helicopter is the creator of the man-carrying version. For VARIO's 1150 JetRanger XL we recommend a main rotor speed of approx. 850 rpm. Electric drive sets from VARIO are already tuned to this...

Prix 1 538,00 €
Détails
En vente sur demande

Référence: 9008.e

Hughes MD 520N 1:6 - Fuselage kit

Commentaire(s): 0

The Hughes MD 520N from VARIO is a 700 size scale helicopter. You can power this remote-controlled model helicopter with electric propulsion. McDonnell Douglas is the creator of the man-carrying version and MD Helicopters produces this helicopter. VARIO now presents the new version with electric power. The model is now much more powerful than its...

Prix 612,70 €
Détails
En vente sur demande

Référence: 9010.e

MD 902 Explorer 1:6 - Fuselage kit

Commentaire(s): 0

The MD 902 Explorer from VARIO is a 700 size scale helicopter. You can power this remote-controlled model helicopter with electric propulsion. McDonnell Douglas is the creator of the man-carrying version and MD Helicopters produces this helicopter. The MD 902 is an update version of the MD 900 with more powerful turbines. VARIO now presents the new...

Prix 800,20 €
Détails
En vente sur demande

Référence: 1360.x

Dauphin AS 365 1:7 - Fuselage kit

Commentaire(s): 0

The Dauphin from VARIO is a 700 size scale helicopter. You can power this remote-controlled model helicopter with electric propulsion. Aérospatiale is the creator of the man-carrying version.For...

Prix 623,80 €
Détails
En vente sur demande