Accueil
Marques

No brand

Fournisseurs
Meilleures Ventes
Flanged ballrace 6 x 10 x 3 mm Aperçu rapide

Référence: 92/91

Flanged ballrace 6 x 10 x 3 mm

Commentaire(s): 0

Ballraces are used wherever moving parts are required to run with a minimum of play and a minimum of friction. The more ballraces are used, the more smoothly the mechanics of a helicopter works, and the lower the rate of wear. The dimensions of a ballrace mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness. For flanged bearings the same...

Prix 14,70 €
Détails
En vente sur demande
Toutes les meilleures ventes

Réservoir en Kevlar 1.4 l pour Kérosène et pétrole

26/50
Note 

Aramid is a fibre that is used in motor racing. The tanks have an even surface inside and rough on the outside.

These fuel tanks are all pressure tested to make sure that they are 100% leak-proof when they arrive at your workshop.

They fit in every fuselage, that would normally use the plastic tank Ord.No. 26/5 for. For example, this Aramid tank is suitable for the turbine Lama, Ord.No. 3401. In case of the Lama, one tank is mounted on each side of the mechanics.

When ordering, one tank is supplied.

When mounting the lid, please fix the screws cross-wise using blue loctite until you have slight pressure on the rubber ring.

 

349,10 €
Quantité
En vente sur demande

 

Política de seguridad

 

Política de envío

 

Política de devolución

Description

Aramid is a fibre that is used in motor racing. The tanks have an even surface inside and rough on the outside.

These fuel tanks are all pressure tested to make sure that they are 100% leak-proof when they arrive at your workshop.

They fit in every fuselage, that would normally use the plastic tank Ord.No. 26/5 for. For example, this Aramid tank is suitable for the turbine Lama, Ord.No. 3401. In case of the Lama, one tank is mounted on each side of the mechanics.

When ordering, one tank is supplied.

When mounting the lid, please fix the screws cross-wise using blue loctite until you have slight pressure on the rubber ring.

 

Détails du produit
26/50
Avis

Aucun avis n'a été publié pour le moment.

Donnez votre avis

Réservoir en Kevlar 1.4 l pour Kérosène et pétrole

Réservoir en Kevlar 1.4 l pour Kérosène et pétrole

Aramid is a fibre that is used in motor racing. The tanks have an even surface inside and rough on the outside.

These fuel tanks are all pressure tested to make sure that they are 100% leak-proof when they arrive at your workshop.

They fit in every fuselage, that would normally use the plastic tank Ord.No. 26/5 for. For example, this Aramid tank is suitable for the turbine Lama, Ord.No. 3401. In case of the Lama, one tank is mounted on each side of the mechanics.

When ordering, one tank is supplied.

When mounting the lid, please fix the screws cross-wise using blue loctite until you have slight pressure on the rubber ring.

 

Donnez votre avis
16 altri prodotti della stessa categoria:
Fieltro clunk pick-up Anteprima

Riferimento: 26/25

Fieltro clunk pick-up

Recensioni: 0

Tank vent filter, to prevent dirt and other foreign objects from entering fuel supply.

Prezzo 19,40 €
Più
In vendita su richiesta
Fascetta stringitubo... Anteprima

Riferimento: 26/34

Fascetta stringitubo benzina / kerosene

Recensioni: 0

Fuel tubing is required to withstand many kinds of thermal and chemical stress, i.e. it has to be resistant to petrol and kerosene whilst maintaining maximum flexibility. However, it must also be possible to fix the tubing reliably to tubes and nipples; the more valuable the model, the more important it becomes to fix the fuel tubing with absolute...

Prezzo 11,20 €
Più
In vendita su richiesta
Fueltank interno per Cobra,... Anteprima

Riferimento: 791/27

Fueltank interno per Cobra, 2,2

Recensioni: 0

The internal fueltank for our model of the Cobra enables the builder to produce a military version of the machine.The capacity of 2.2 l. gives flight times of around 12 - 14 minutes.

Prezzo 152,70 €
Più
In vendita su richiesta
Serbatoio da 540 ml per... Anteprima

Riferimento: 830/26

Serbatoio da 540 ml per benzina

Recensioni: 0

Tank 540 ml, petrol-resistantincluding the requested accessories for installation in a Benzin-Trainer or in a petrol mechanics.The CofG of a model helicopter should only be checked with an empty fuel tank.During the flight the fuel is situated in a place where the additional weight does not have an adverse effect. If you set the CofG with a full fuel...

Prezzo 25,10 €
Più
In vendita su richiesta
Fieltro clunk pick-up Anteprima

Riferimento: 26/30

Fieltro clunk pick-up

Recensioni: 0

Felt clunk pick-up 16 Ø x 26 mmfor bubbles-free suck up and constant flow ofpetrol and kerosene

Prezzo 16,90 €
Più
In vendita su richiesta

Suivez-nous sur Facebook

Facebook