Home
Marchi

Nessuna marca

Fornitori
Migliori vendite
Flanged ballrace 6 x 10 x 3 mm Anteprima

Riferimento: 92/91

Flanged ballrace 6 x 10 x 3 mm

Recensioni: 0

Ballraces are used wherever moving parts are required to run with a minimum of play and a minimum of friction. The more ballraces are used, the more smoothly the mechanics of a helicopter works, and the lower the rate of wear. The dimensions of a ballrace mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness. For flanged bearings the same...

Prezzo 14,70 €
Più
In vendita su richiesta
Aste 3,0 x 75 mm Anteprima

Riferimento: 70/76

Aste 3,0 x 75 mm

Recensioni: 0

Ready-made pushrod, threaded M 3. Content of the package: 1 piece

Prezzo 6,30 €
Più
In vendita su richiesta
Tutte le migliori vendite

Rotor head linkage for Alouette III

703/45
Valutazione 

This rotor head linkage is essential for the correct operation of the rotor head of the Alouette III due to its heavy take-off weight.

193,20 €
Tasse incluse
Quantità
In vendita su richiesta

 

Política de seguridad

 

Política de envío

 

Política de devolución

Descrizione

This rotor head linkage is essential for the correct operation of the rotor head of the Alouette III due to its heavy take-off weight.

Dettagli del prodotto
703/45
Recensioni

Ancora nessuna recensione da parte degli utenti.

Scrivi la tua recensione

Rotor head linkage for Alouette III

Rotor head linkage for Alouette III

This rotor head linkage is essential for the correct operation of the rotor head of the Alouette III due to its heavy take-off weight.

Scrivi la tua recensione
16 autres produits dans la même catégorie :
O-ring 2 x 6 mm soft Aperçu rapide

Référence: 74/6

O-ring 2 x 6 mm soft

Commentaire(s): 0

O-ring 2 x 6 mm soft Content of the package: 8 piecesTip: O-rings always slide with a drop of silicone oil onto the shaft.

Prix 6,30 €
Détails
En vente sur demande
Kit mélangeurs Aperçu rapide

Référence: 78/40

Kit mélangeurs

Commentaire(s): 0

Mixer levers are an essential part of every flybar-controlled rotor head. From the swashplate a pushrod runs to the ballraced mixer arm which is screwed to the blade holder arm. The mixer levers transmit the control movement to the flybar via the double ball-link.Additionial accessories for the use of mixer levers are either two flanged ballraces or two...

Prix 37,50 €
Détails
En vente sur demande
Co-rotating dome coverage-set Aperçu rapide

Référence: 480/53

Co-rotating dome coverage-set

Commentaire(s): 0

You can fit to your Chinook heads a plate each that covers the dome and spins with the rotor head rpm. A pretty detail, that also can be found on the original Chinook helicopters. The plates / dome covers are mounted on the clamp rings of the main shafts.Pack of 2 plates incl. mounting material

Prix 176,40 €
Détails
En vente sur demande
Rotor brake, GRP Aperçu rapide

Référence: 72/4

Rotor brake, GRP

Commentaire(s): 0

When you have landed and stopped the engine, the rotor head continues spinning for quite some time until it stops by itself. A rotor brake shortens the time you have to wait. Using light pressure with the flat of your hand on the domed face of the rotor brake you can stop the rotor in a few moments.Please note: stay in safe distance away from the turning...

Prix 14,70 €
Détails
En vente sur demande
Clamp ring pitch... Aperçu rapide

Référence: 54/16

Clamp ring pitch compensator 17 mm

Commentaire(s): 0

The 17 mm Ø clamp ring is fitted to the rotor head centre piece, the steel pin slides in the guide slot of the pitch compensator. Rotate the clamp for fine adjustment so that your helicopter flies straight when you apply a pitch-axis command.Clamp ring for pitch compensator 17 mm Ø, length of the pin 30 mm.

Prix 27,40 €
Détails
En vente sur demande
Ball collet 5 mm Aperçu rapide

Référence: 86/10

Ball collet 5 mm

Commentaire(s): 0

Ball collets provide the fixation of double ball-links on the flybar, in order to settle the essential distance to the rocker.Ball collet 5 mm Ø, pack of 2, chrome-plated.

Prix 19,40 €
Détails
En vente sur demande
Mixer lever cranked Aperçu rapide

Référence: 78/41

Mixer lever cranked

Commentaire(s): 0

Mixer lever, content of the package 1 piece.Additionial accessories for the use of mixer levers are either two flanged ballraces or two flanged bushes from Delrin as a low cost alternative. The screwing on the blade holder arm complies with the kind of hole, i.e. it depends on the through hole or on the blind hole. Please note for choosing the screws:...

Prix 17,00 €
Détails
En vente sur demande

Seguici su Facebook

Facebook