Home
Marchi

Nessuna marca

Fornitori
Migliori vendite
Flanged ballrace 6 x 10 x 3 mm Anteprima

Riferimento: 92/91

Flanged ballrace 6 x 10 x 3 mm

Recensioni: 0

Ballraces are used wherever moving parts are required to run with a minimum of play and a minimum of friction. The more ballraces are used, the more smoothly the mechanics of a helicopter works, and the lower the rate of wear. The dimensions of a ballrace mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness. For flanged bearings the same...

Prezzo 14,70 €
Più
In vendita su richiesta
Aste 3,0 x 75 mm Anteprima

Riferimento: 70/76

Aste 3,0 x 75 mm

Recensioni: 0

Ready-made pushrod, threaded M 3. Content of the package: 1 piece

Prezzo 6,30 €
Più
In vendita su richiesta
Tutte le migliori vendite

Side frame for BENZIN Acrobatic

834/50
Valutazione 



The outstanding features of the BENZIN Acrobatic models are mainly based on these side frames.

 

  • The engine moved to the front to optimise the CofG.
  • Installation of an on-board electric starter as an option.
  • CCPM - i.e. direct linkage at 4-points / 90 degree
  • Installation of the tank below the main rotor shaft, i.e.
    while the tank runs dry the CofG does not change.
  • The cut out for the engine is designed to install and
    reinstall the engine without removal of the base plate.

    The two side frames are identical in size an shape.
    Content of the package: 1 piece.
131,70 €
Tasse incluse
Quantità
In vendita su richiesta

 

Política de seguridad

 

Política de envío

 

Política de devolución

Descrizione



The outstanding features of the BENZIN Acrobatic models are mainly based on these side frames.

 

  • The engine moved to the front to optimise the CofG.
  • Installation of an on-board electric starter as an option.
  • CCPM - i.e. direct linkage at 4-points / 90 degree
  • Installation of the tank below the main rotor shaft, i.e.
    while the tank runs dry the CofG does not change.
  • The cut out for the engine is designed to install and
    reinstall the engine without removal of the base plate.

    The two side frames are identical in size an shape.
    Content of the package: 1 piece.
Dettagli del prodotto
834/50
Recensioni

Ancora nessuna recensione da parte degli utenti.

Scrivi la tua recensione

Side frame for BENZIN Acrobatic

Side frame for BENZIN Acrobatic



The outstanding features of the BENZIN Acrobatic models are mainly based on these side frames.

 

  • The engine moved to the front to optimise the CofG.
  • Installation of an on-board electric starter as an option.
  • CCPM - i.e. direct linkage at 4-points / 90 degree
  • Installation of the tank below the main rotor shaft, i.e.
    while the tank runs dry the CofG does not change.
  • The cut out for the engine is designed to install and
    reinstall the engine without removal of the base plate.

    The two side frames are identical in size an shape.
    Content of the package: 1 piece.
Scrivi la tua recensione
16 other products in the same category:
Yoke connector, shaft 5 mm Quick view

Reference: 49/55

Yoke connector, shaft 5 mm

Review(s): 0

This slotted connection shaft holds the loop of the 2 mm tail drive wire. Like all other tail drive systems it is necessary to install "play" (approx. 1 mm) for the wire. Yoke connector5 mm diameter shaft

Price 25.10€
More
On sale upon request
Bush 10 x 14 x 2.5 mm Quick view

Reference: 36/11

Bush 10 x 14 x 2.5 mm

Review(s): 0

The freewheel hubs are sealed on both sides by brass rings; the rings can also be replaced when necessary (i.e. when the freewheel bearings are replaced).Pack of 2

Price 11.20€
More
On sale upon request
Clamp ring 12 mm for rotor... Quick view

Reference: 54/14

Clamp ring 12 mm for rotor shaft

Review(s): 0

The clamp ring below the dome plate secures the rotor shaft inside the mechanics. Pay attention to achieve a safe installation, because the complete model is hanging on this clamp ring! Clamp ring for rotor shaft 12 mm Ø

Price 32.30€
More
On sale upon request

Seguici su Facebook