Reference: 70/135

Aste 2,5 x 135 mm

Ready-made pushrod, threaded M 2.5, approx. 8 mm thread length each end. Content of the package: 1 piece

Reference: 705/37

5-blade rotor head 12 mm

Not available

Reference: 89/4

Pushrod cranked, 2.5 x 91 mm

On 2-blade rotor heads with flybar the angled pushrods connect the pitch compensator with the control bridge.Ready-made pushrod, threaded M 2.5, approx. 8 mm thread length each end. Pack of 2

Reference: 705/32

5-blade rotor head 12 mm

Rotor heads with three or more rotor blades really deserve their own chapter in any discussion of model helicopters; speculation is always in the air at such times, because sooner or later most...

Reference: 1005/47

Bell 47 G rotor head

This rotor head was modelled as closely as possible on the original version installed on the Bell 47 G full-size helicopter. It is an excellent choice for use on the Bell 47 G III model, Ord. No. 4700.The centrifugal weights and springs are dummies, and do not work. The rotor blade swivel limits are also imitations, and have no function.The blade grips...

Reference: 89/3

Pushrod cranked, 2.5 x 100 mm

On 2-blade rotor heads with flybar the angled pushrods connect the pitch compensator with the control bridge.Ready-made pushrod, threaded M 2.5, approx. 8 mm thread length each end. Pack of 2.

Reference: 70/71

Pushrod 3.0 x 70 mm

Ready-made pushrod, threaded M3 content of the package: 1 piece

Reference: 705/36

5-blade rotor head 12 mm

Not available

Reference: 1005/12

Rotor head for Bell 212Ord.No. 1005/12

The basic method of operation of the turbine-powered Bell 212's rotor head is the same as that of the Bell 47 G III rotor head. The main difference is that the components have been modified to match the appearance of the Bell 212, and are therefore of different design. For example, a separate swashplate driver is not required, as it is integrated into the...

Reference: 70/70

Pushrod 2.5 x 70 mm

Ready-made pushrod, threaded M 2.5, approx. 8 mm thread length each end. Content of the package: 1 piece

Reference: 70/100-2

Gestänge 2,5 x 100 mmOrd.No. 70/100-2

Reference: 705/34

5-blade rotor head 12 mm

Rotor heads with three or more rotor blades really deserve their own chapter in any discussion of model helicopters; speculation is always in the air at such times, because sooner or later most...