Marchi

Nessuna marca

Fornitori

Riferimento: 92/91

Flanged ballrace 6 x 10 x 3 mm

Recensioni: 0

Ballraces are used wherever moving parts are required to run with a minimum of play and a minimum of friction. The more ballraces are used, the more smoothly the mechanics of a helicopter works, and the lower the rate of wear. The dimensions of a ballrace mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness. For flanged bearings the same...

Prezzo 14,70 €
Più
In vendita su richiesta

Riferimento: 70/76

Aste 3,0 x 75 mm

Recensioni: 0

Ready-made pushrod, threaded M 3. Content of the package: 1 piece

Prezzo 6,30 €
Più
In vendita su richiesta
Tutte le migliori vendite

Ball-collet with double ball

832/66
Valutazione 

The use of ball-collets makes it possible to attach double ball-links to the flybar; this automatically sets the correct rocker spacing.

The double-ball on these ball-collets also provides an adjustment facility for the VR-22 rotor head, as the double ball-link can always be set vertical by connecting it to the inside or outside ball - provided that the linkage allows this; the same applies to the mixer lever.

Pack of 2

37,50 €
Tasse incluse
Quantità
In vendita su richiesta

 

Política de seguridad

 

Política de envío

 

Política de devolución

Descrizione

The use of ball-collets makes it possible to attach double ball-links to the flybar; this automatically sets the correct rocker spacing.

The double-ball on these ball-collets also provides an adjustment facility for the VR-22 rotor head, as the double ball-link can always be set vertical by connecting it to the inside or outside ball - provided that the linkage allows this; the same applies to the mixer lever.

Pack of 2

Dettagli del prodotto
832/66
Recensioni

Ancora nessuna recensione da parte degli utenti.

Scrivi la tua recensione

Ball-collet with double ball

Ball-collet with double ball

The use of ball-collets makes it possible to attach double ball-links to the flybar; this automatically sets the correct rocker spacing.

The double-ball on these ball-collets also provides an adjustment facility for the VR-22 rotor head, as the double ball-link can always be set vertical by connecting it to the inside or outside ball - provided that the linkage allows this; the same applies to the mixer lever.

Pack of 2

Scrivi la tua recensione
16 autres produits dans la même catégorie :

Référence: 117/20

Thrust bearing set complete

Commentaire(s): 0

The standard version of our mechanics includes ground thrust bearing shafts with a of 8 mm Ø and a length of 110 mm.Thrust bearings absorb the high centrifugal forces exerted by the main rotor blades. The effect of the axial bearings is retained in full when the blade holders rotate.Thrust bearing set, complete as shown.

Prix 54,60 €
Détails
En vente sur demande

Référence: 74/14

O-ring 3 x 16 mm soft

Commentaire(s): 0

O-ring 3 x 16 mm soft Content of the package: 8 pieces Tip: O-rings always slide with a drop of silicone oil onto the shaft.

Prix 6,30 €
Détails
En vente sur demande

Référence: 78/41

Mixer lever cranked

Commentaire(s): 0

Mixer lever, content of the package 1 piece.Additionial accessories for the use of mixer levers are either two flanged ballraces or two flanged bushes from Delrin as a low cost alternative. The screwing on the blade holder arm complies with the kind of hole, i.e. it depends on the through hole or on the blind hole. Please note for choosing the screws:...

Prix 17,00 €
Détails
En vente sur demande

Seguici su Facebook