Corpo centrale bipale

Référence: 832/74

Joint torique 9 x 4.5 mm

O-ring 9 x 4.5 mm Content of the package: 4 pieces Tip: O-rings always slide with a drop of silicone oil onto the shaft.

Référence: 702/95

Spring for rotor head Bell 47

 Content of the package2 pieces

Référence: 71/18

Spacer for pitch compensator 2.8 x 5 x 2 mm

 Content of the package2 pieces

Référence: 76/9

Bras porte-pales, alu

Blade holder arm, aluminium. Content of the package: 1 piece.

Référence: 707

Rotor cap for Multi blade head

The diameter is 83 mm and the construction height from the screw-on surface to the highest point is 13 mm.It is fastened using an M4 x 14 hexagon socket screw (included).

Référence: 54/18

Clamp ring for 12 mm

Same design as clamp ring 54/13, but for 12 mm Ø main rotor shaft.Clamp ring for pitch compensator 12 mm Ø, length of the pin 40 mm.

Référence: 832/54

Clamp ring

Clamp ring for rotor head 722/72.

Référence: 707/3

Rotor head cover for 3-blade head

155 mm diameter

Référence: 87/12

Doble bola-link para Delta rotor

Référence: 71/9

Poids d'équilibrage Ø 4 mm

Balance weight ∅ 4 mm approx. 7 g Content of the package 2 pieces

Référence: 72/18

Rotor head centre piece, rigid

Aluminium centre piece, rigid, for 10 mm main shaft

Référence: 72/40

Rotor head centre piece

Aluminium centre piece for 10 mm main shaft

Référence: 91/55

Lead for paddles

 Lead for paddlespack of 2approx. 8.5 g each

Référence: 770/36

Spacer for rotor cap BK117

Not available

Référence: 832/66

Ball-collet with double ball

The use of ball-collets makes it possible to attach double ball-links to the flybar; this automatically sets the correct rocker spacing. The double-ball on these ball-collets also provides an adjustment facility for the VR-22 rotor head, as the double ball-link can always be set vertical by connecting it to the inside or outside ball - provided that the...

Référence: 72/32

Shaft bearing

Shaft bearing Content of the package: 1 piece