Pushrod 3.0 x 100 mmOrd.No. 70/101-2

Reference: 70/130

Pushrod 3.0 x 130 mm

Ready-made pushrod, threaded M 3. Content of the package: 1 piece

Reference: 89/4

Pushrod cranked, 2.5 x 91 mm

On 2-blade rotor heads with flybar the angled pushrods connect the pitch compensator with the control bridge.Ready-made pushrod, threaded M 2.5, approx. 8 mm thread length each end. Pack of 2

Reference: 70/80-5

Gestänge 2,5 x 80 mmOrd.No. 70/80-5

Reference: 89/1

Pushrod cranked, 2.5 x 72 mm

On 2-blade rotor heads with flybar the angled pushrods connect the pitch compensator with the control bridge.Ready-made pushrod, threaded M 2.5, approx. 8 mm thread length each end. Pack of 2.

Reference: 70/110

Gestänge 2,5 x 110 mm

Reference: 70/40

Pushrod 2.5 x 40 mm

Ready-made pushrod, threaded M 2.5, approx. 8 mm thread length each end. Content of the package: 1 piece

Reference: 89/7

Aste piegate 3,0 x 152 mm

On 2-blade rotor heads with flybar the angled pushrods connect the pitch compensator with the control bridge.Ready-made pushrod, threaded M 2.5, approx. 8 mm thread length each end. Pack of 2

Reference: 70/80

Pushrod 2.5 x 80 mm

Ready-made pushrod, threaded M 2.5, approx. 8 mm thread length each end. Content of the package: 1 piece

Reference: 70/101-4

Gestänge 3,0 x 100 mmOrd.No. 70/101-4

Reference: 70/96-3

Gestänge 3,0 x 95 mmOrd.No. 70/96-3

Reference: 70/60

Pushrod 2.5 x 60 mm

Ready-made pushrod, threaded M 2.5, approx. 8 mm thread length each end. Content of the package: 1 piece

Reference: 70/105-2

Gestänge 3,0 x 105 mmOrd.No. 70/105-2

Reference: 70/76

Pushrod 3.0 x 75 mm

Ready-made pushrod, threaded M 3. Content of the package: 1 piece

Reference: 70/90-4

Gestänge 2,5 x 90 mmOrd.No. 70/90-4

Reference: 70/40-4

Gestänge 2,5 x 40 mmOrd.No. 70/40-4

Reference: 70/116-5

Gestänge 3 x 115 mmOrd.No. 70/116-5