Lama SA 315 B 1:4 - Fuselage kit

Riferimento: 722/35

L'asse del rotore 12 x 560 mm

Not available

Riferimento: 26/5

Tanque de Kerosene 1,25 l

Tank for Kerosene, 1250 ml, 2 x required for the Lama

Riferimento: 26/50

Kevlartank para Queroseno 1.4 l

Aramid is a fibre that is used in motor racing. The tanks have an even surface inside and rough on the outside. These fuel tanks are all pressure tested to make sure that they are 100% leak-proof when they arrive at your workshop. They fit in every fuselage, that would normally use the plastic tank Ord.No. 26/5 for. For example, this Aramid tank is...

Riferimento: 703/39

Scala della testa del rotore

Lama Scale Rotorhead: for the large Vario LamaWe have now finalized our tests with the Starwood Lama scale rotorhead on the Vario Lama 1:4. Now we are proud to present to you under the Ord.No. 703/39, a truly Scale rotor head including all necessary parts in order to mount this head on the Vario Lama.The head is available now. The kit includes the...

Riferimento: 703/40

Testa del rotore a 3 pale da 12 mm, -20

Not available

Riferimento: 416/3

Set 3 pale 2500 mm

Specification 3-blade-set length: 1090 mm rotor disc: 2500 mm blade root: 22 mm 1-hole blade chord: 75 mm profile thickness: 1 mm weight: ca. 500 g material: CFRP Shark Skin finish: anthracite matt symmetry: reflex l.h.r.

Riferimento: 417/3

Set 3 pale 2500 mm

Specification 3-blade-set length: 1090 mm rotor disc: 2500 mm blade root: 22 mm 1-hole blade chord: 75 mm profile thickness: 1 mm weight: ca. 500 g material: CFRP Shark Skin finish: anthracite matt symmetry: reflex r.h.r.

Riferimento: 340/2

Accessori per Lama turbina

The suckering ducts are on the model exactly on the same place as the original ones in position to the turbine on the full-size helicopter.

Riferimento: 330/45

Gancio carico

The hook for the Lama is fully functional. The scale aluminium frame comes with further more accessories, inclusive servo mount.The fuselage already offers the fastening, ready soldered.On your model you mount the hook in the required location, and release dummy loads by activating a servo via your transmitter.

Riferimento: 330/2

Imitazione turbina

The dummy turbine provides the ideal starting point if you wish to install additional scale fittings on your Lama.The dummy turbine is assembled from six separate GRP mouldings, and fits all models with VR-22 mechanics installed.In the turbine-powered version of the Lama the actual turbine is located in this position.GRP dummy turbineLength approx. 490 mm

Riferimento: 330/36

Fissaggio magnetico

If you don't want that the doors of the Lama canopy close itself after opening, you use these magnet latches.

Riferimento: 330/31

Finestratura a boccia, Lama

Bubble window for Lama Ord.No. 3300 / 3400 / 3401, Rotor ø 2500 mm

Riferimento: 330/5

Set accessori portelli per Bell 47 G III, Lama

Door fittings for large-scale model helicopters do not differ fundamentally from one type to another. However, the size of these accessories is important if the model is to look convincing, otherwise they will look out of scale.Compare the door handle of the Lama with that of the Alouette II, and the difference is obvious.The door fittings set for the...

Riferimento: 340/6

Pedana di salita per Lama

If you have a mind to continue adding detail fittings to your Lama, you are sure to appreciate this landing gear step which can be fitted to an existing model at any time. The step is made of stainless steel, and is supplied complete with clips, screw fittings and tread material. Entry step, for Lama, pack of 1

Riferimento: 340/5

Snowboards per Lama 1 paio

When full-size helicopters have to land in deep snow, the skids are fitted with "snowboards" to prevent them sinking in.On the model they look really good, and also help the pilot detect the model's orientation in the air.Make your model an eye-catcher and use some rivets for the decoration of the skies."Snowboards" for Lama, 1 pair

Riferimento: 340/1

Supporti ruota per Lama

The Lama is a large helicopter, and the supplementary wheels which can be attached to the landing gear make it much easier to move the machine into and out of the hangar. However, the wheels are removed prior to flying the model. These wheel holders for our model of the Lama are made of plastic and are simply glued to the 20 mm Ø skid tubes using UHU...

Riferimento: 330/10

Protezione capottina per Lama

This protective sheath provides effective protection to the cabin of your valuable helicopter, and helps to avoid unsightly scratches. It is simply pulled over the cabin and closed with a hook -and-loop fastener.Cabin sheath for Lamamatching the cabins of the models 3300 and 3400

Riferimento: 350/17

Coperchio scarico Ø 90 mm

When the turbine of a full-size helicopter is not running, the engine is protected with an exhaust cover which prevents foreign objects finding their way inside the turbine. This exhaust cover for model turbines is suitable for the Lama, Alouette III and any other machine with a 90 mm Ø exhaust pipe. Caution: it is essential to allow the exhaust pipes to...

Riferimento: 340/13

Finta trasmissione

This dummy power unit can be installed on turbine powered helicopters to produce an even more realistic intersection between the turbine and the gearbox.When the imitation rotor brake of the dummy part is pushed over the turbine starter, the rubber connector is spring-loaded in front of the gearbox connection; retaining screws are not required.Dummy power...

Riferimento: 341/36

CESTELLO SOTTOPANCIA PER LAMA

Load basket for Lamalength:410 mmwidth:100 mmheight70 mm

Riferimento: 341/417

Specchio Grande, Lama 1:4

dimensions: 4 x 5.4 x 1 cm

Riferimento: 341/407

Serbatio Olio, Lama, 1:4

dimensions: 6.5 x 4.5 x 6.,5 cm2-part

Riferimento: 341/420

Vano Batteria, Lama, 1:4

dimensions: 3.2 x 5.25 x 7.75 cm

Riferimento: 341/408

Serbatoio Olio piccolo, Lama, 1:4

dimensions: 6.8 x 1.8 x 6.8 cm

Riferimento: 341/429

Pannello Cockpit dettagliato, LAMA

Addition to the Cockpit Ord. No. 340/29 to make it look more realistic

Riferimento: 341/403

Per Lama, 1:4

dimensions: 6 x 8.2 x 0.5 cm2-part

Riferimento: 341/405

Pitot 41:4

dimensions: 5.7 x 1.7 x 2.5 cm

Riferimento: 341/404

Luci di posizione Lama 1/4 , 2 pc

dimensions: 4.5 x 3.2 x 1.8 cmPack of 2 (l/r)

Riferimento: 341/406

Scatola Fusibili Electric Box Lama 1:4

dimensions: 12.6 x 7 x 4.3 cm2-part

Riferimento: 341/402

Filtro, Lama 1:4

dimensions: 4.3 x 2.5 cm, inner diameter: 1.43 cm

Riferimento: 341/419

Tendicinghia pulegge, 6 pz Lama 1/4

1,18 x 3,15 x 0,72 cmPack of 6

Riferimento: 341/412

Ingresso aria turbina Lama 1/4

dimensions: 8 x 3.5 x 4.3 cm

Riferimento: 330/11

Horizontal stabiliser GRP Lama

Horizontal stabiliser GRP Lama, 2-part.

Riferimento: 330/1

Skid landing gear Lama

welded aluminum landing gear

Riferimento: 470/22

Bell 47 Mechanics

This mechanical system has been developed specifically for the Bell 47 G III, so that the model helicopter can be fitted with a VARIO G230 petrol engine.The mechanics is designed for a 2-blade main rotor.Without motor and petrol components (see Ord.No. 26/100).

Riferimento: 1002/65

Turbine-Mechanics for Lama (Jakadofsky Pro Edition/5000)

Designed for use with the Jakadofsky Pro Edition (25-tooth clutch bell) in a model helicopter such as the Lama.The picture shows the mechanics in the installed state; the set is supplied in kit-form, i.e. not assembled. The Lama fuselage kit, Ord.No. 3401, is supplied with this mechanical system.If you wish to use the mechanics in any other model, it is...

Riferimento: PROKEROSTART

Kerosene start for Jakadofsky

Kerosene starting hardware package

Riferimento: 340/16

Exhaust for Lama

This exhaust system is designed for the Lama with turbine power system.

Riferimento: 33/3

Rotor blade pouch 3-blade Ø 2500 mm

Riferimento: 68/50

Swashplate driver 12 mm

 Swashplate driver, metal4 ballracesweigth approx. 25.8 gsuitable for 12 mm Ø main shafts

Riferimento: 341/427

Collective Pitch lever, 1:4,2

dimenions: 7.7 x 2 x 3 cm

Riferimento: 341/426

Collective Pitch lever, 1:4,2

dimensions: 7.22 x 2.5 x 8.67 cm

Riferimento: 1/40

Pilot William, 1:4, white long sleeve + jeans

Pilot William 450 mm Scale 1:4 white long sleeve top + jeans Made in Germany

Riferimento: 1/49

Pilot William 1:4, green long sleeve + trousers

Pilot William 450 mm Scale 1:4 green long sleeve top + trousers Made in Germany

Riferimento: 995

RC system accessories incl. 5 servos

If you already own a radio control system and then purchase a second model helicopter, the next step is to consider carefully which electronic components are the best choice for the new model.The combination illustrated here comprises accessories which have proved excellent in practice. RC system accessories, with Futaba BLS 452 servos excluding radio...

Riferimento: 344/10

Couplers for 8 mm stainless steel tube

For the Lama, Ord.No. 3404, 3300 and 3401/3400. You can use these couplings to make part of the latice frame removeable, for better access to the fuel tank and mechanics.package content: 2 pairs

Riferimento: 307/1

Aufkleber Sterne AIR ZERMATT

Riferimento: 92/81

Heckrotor-Ergänzungsset 3-Blatt

Riferimento: 340/81

Heckausleger Lama Turbine

Riferimento: 330/27

Tankattrappe Lama

Riferimento: 330/9

Kanzel Lama, GFK

Riferimento: 330/30

Lama Scheibensatz