Schweizer 300C 1:4 - Fuselage kit

Reference: 331

Tail boom 31 x 1.0 x 1200 mm, black

 Tail boom31 x 1.0 x 1200 mmblack

Reference: 722/35

Rotor shaft 12 x 560 mm

Not available

Reference: 26/100

Benzin kit incl. fuel tank 540 ccm

Not available

Reference: 830/68

Fine-mesh petrol and kerosine filter

Chemical analysis used in Formel 1 is able to determine 1 g of impurity within 1 ton of oil. To fulfill your demand on the cleanness of the fuel for your model helicopter you use the fine-mesh petrol filter inside the fuel tubing between the tank and the carburettor. Also suitable for kerosine turbine fuel.

Reference: 830/83

Petrol fuel tubing 1 m

Fuel tubing for petrolapprox. 1 mtransparentFuel tubing inevitably suffers from the effects of ageing. Always replace brittle tubing before it gives problems! 

Reference: 703/38

3-blade rotor head 12 mm

Not available

Reference: 413/2

3-blade-set 2200 mm

Specification 3-blade-set length: 965 mm rotor disc: 2200 mm blade root: 18 mm 1-hole blade chord: 65 mm profile thickness: 9 mm weight: ca. 450 g material: CFRP Shark Skin finish: anthracite matt symmetry: reflex l.h.r.

Reference: 31/34

Joystick set

The control column and collective pitch stick are part of the basic equipment of any helicopter's cockpit.The version shown here is based on the fittings found in the full-size Schweizer 300 C...

Reference: 330/5

Fittings set Bell 47 G III, Lama

Door fittings for large-scale model helicopters do not differ fundamentally from one type to another. However, the size of these accessories is important if the model is to look convincing, otherwise they will look out of scale.Compare the door handle of the Lama with that of the Alouette II, and the difference is obvious.The door fittings set for the...

Reference: 632/6

Tail skid Schweizer 300

Not available

Reference: 632/22

Petrol mechanics for Schweizer 300

Petrol mechanics designed to be used with the larger Vario Schweizer 300 (Ord.No. 6032)Without motor and petrol components (see Ord.No. 26/100).

Reference: 632/22 E

Electric mechanics for Schweizer 300

Petrol mechanics designed to be used with the larger Vario Schweizer 300 (Ord.No. 6032)Without motor and petrol components (see Ord.No. 26/100).

Reference: 632/16

Exhaust for large Schweizer 300 C

For use with the large Schweizer 300 C Ord.No. 6032

Reference: 1022/13

Carburettor intake trumpet

This screw-fitting carburettor intake trumpet is designed to improve the flow of air entering the carburettor. Complete with screws and gasket.

Reference: 4321

Suppressed plug cap for petrol engine G230 / G240

Suppressed plug cap to protect the radio control system from potential interference caused by the ignition system

Reference: 33/3

Rotor blade pouch 3-blade Ø 2500 mm

Reference: 68/50

Swashplate driver 12 mm

 Swashplate driver, metal4 ballracesweigth approx. 25.8 gsuitable for 12 mm Ø main shafts

Reference: 1/40

Pilot William, 1:4, white long sleeve + jeans

Pilot William 450 mm Scale 1:4 white long sleeve top + jeans Made in Germany

Reference: 1/49

Pilot William 1:4, green long sleeve + trousers

Pilot William 450 mm Scale 1:4 green long sleeve top + trousers Made in Germany

Reference: 995

RC system accessories incl. 5 servos

If you already own a radio control system and then purchase a second model helicopter, the next step is to consider carefully which electronic components are the best choice for the new model.The combination illustrated here comprises accessories which have proved excellent in practice. RC system accessories, with Futaba BLS 452 servos excluding radio...

Reference: 632/45

Riemenattrappe Schweizer 300

Reference: 70/142-3

Gestänge 3,0 x 142 mmOrd.No. 70/142-3

Reference: 722/24

Gebläseschachtattrappe

Reference: F1030

Benzin-Motor 29 cm³ - Gebraucht - guter ZustandOrd.No. F1030

Reference: 3619

Set de fotos Schweizer 300 en CD